Loading ...
Loading ...
Loading ...
OPERATING INSTRUCTIONS
6
1. Power button: Used to turn the appliance on or
off.
2. Fan button: Used to set the fan speed; low,
medium, high and auto.
3. Mode button: Used to choose the mode; cool,
fan or dry.
4. Increase and decrease buttons: Used to set
the desired temperature. Press and hold the
up and down buttons for 3 seconds to change
the temperature scale between Celsius and
Fahrenheit.
Note: Certain functions can only be accessed
through the remote control.
CONTROL PANEL
DISPLAY PANEL
1
2
3
4
5
1. Temperature, time and icon display
2. Cool mode indicator
3. Temperature scale indicator
4. Timer indicator
5. Fan speed indicator
• Low fan is indicated by one bar.
• Medium fan is indicated by two bars.
• High fan is indicated by three bars.
• Auto fan speed is indicated by cycling bars.
OPERATING MODES
Cool Mode
Choose cool mode to set the cooling function.
• Press the mode button until the snowfl ake icon
appears on the display.
• Use the increase and decrease buttons to choose
the desired temperature.
• Use the fan button to choose the desired fan
speed.
• The temperature can be set within a range of 18
- 32°C (64 - 90°F).
• The exhaust hose should be installed during cool
mode to ensure the best results.
Dry Mode
Choose dry mode to remove excess moisture from
the air during periods of high humidity.
• Press the mode button until the “dh” symbol
appears on the display.
• The fan speed will be set to auto.
• The exhaust hose should be installed during cool
mode to ensure the best results.
• It may be necessary to install the continuous
drain hose during dry mode to remove excess
water.
Fan Mode
Choose fan mode to run the internal fan without
engaging the cooling function.
• Press the mode button until the fan icon appears
on the display.
• Press the fan button to choose the desired fan
speed: low, medium, high or auto.
• The exhaust hose does not need to be installed
during fan mode.
2 3
1
4
Loading ...
Loading ...
Loading ...