Loading ...
Loading ...
Loading ...
10
5. Screw the alternative left top hinge 8, included in the fittings, on the left hand side of cabinet. (Fig. 3)
6. Relocate the door to the designated position. Then screw the bottom hinge assembly on the left
designated position and tighten it after the door is leveled. (Fig. 1)
7. Remove the handle from the left side of the door and install it on the right side. (See next section.)
INSTALLING THE STAINLESS STEEL HANDLE
This appliance includes a stainless steel handle that is not required
to operate the unit. To install the handle, follow the instructions
below:
1. Remove the door gasket
○
2
2. Install the handle
on the side you wish to install the
handle - you can see two designated holes for handle
installation.
○
4 tightly as shown above with two
screws
○
1 and flat washers
○
3
3. Replace the door gasket.
provided.
OPERATING YOUR APPLIANCE
It is recommended you install the appliance in a place where the ambient temperature is between 60 and
90°F (16 – 32°C), although optimum performance occurs when the temperature range is 72 and 78ºF (23
– 26ºC). If the ambient temperature is above or below the recommended temperatures, the performance
of the unit may be affected. For example, placing your unit in extremely cold or hot conditions may cause
interior temperatures to fluctuate. The operating range of 36 – 43ºF (2 – 6ºC) may not be reached.
CONTROL PANEL
ON/OFF Power
To turn the appliance ON or OFF, touch the symbol and hold for 5 seconds.
NOTE: Pressing the POWER key once can switch off the audible alarm when the alarm is on.
LIGHT
Turns the inner light ON and OFF.
UP
Used to increase (warm) the set temperature by 1°C/1ºF.
DOWN
Used to decrease (cool) the set temperature by 1°C/1ºF.
Loading ...
Loading ...
Loading ...