Loading ...
Loading ...
Loading ...
~
The Miele ElectroBrush is a motor driven accessory for use only
with Miele vacuum cleaners. The vacuum cleaner must not be used
with an ElectroBrush produced by another manufacturer.
~
Repairs should only be carried out by a Miele authorised service
technician. Repairs and other work by unqualified persons could be
dangerous and will void the warranty. Miele cannot be held liable for
unauthorised work.
~
Do not use the vacuum cleaner if the mains cable is damaged. If
the cable is damaged, it must be replaced together with a complete
cable rewind. For safety reasons, this must only be done by a Miele
authorised service technician.
~
Do not pull or carry the vacuum cleaner by the cable and be
careful not to damage the cable when withdrawing the plug from the
socket.
Keep the cable away from sharp edges and do not let it be
squashed, for example, under a door.
Avoid running the vacuum cleaner over the cable.
This could damage the cable, plug or socket and pose a safety
hazard.
~
When vacuuming especially fine dust, electrostatic charges build
up naturally. Under certain conditions these charges will be
released. To avoid the unpleasant effects of these discharges, a
metal inlay has been incorporated into the underside of the handle.
Please make sure that you keep your hand in constant contact with
this metal strip during vacuuming.
~
Do not let the vacuum cleaner, the electro suction hose, the
electro telescopic wand or the ElectroBrush get wet. Clean all parts
with a dry or slightly damp cloth.
~
The electro suction hose and the electro telescopic wand contain
electrical wires. The plug connectors must not come in contact with
water. Danger of electric shock! They should only be cleaned with a
dry cloth.
Warning and Safety instructions
8
Loading ...
Loading ...
Loading ...