Loading ...
Loading ...
Loading ...
16
B O S C H
* Model dependent
AntiCalc
Multiple descaling system
D. anti-calc
A. self-clean
B. Calc'nClean
C.
A “self-clean”
The “self-clean” lter between the water
tank and the pump prevents scale impairing
the steam generation system and ensures
the optimum production of steam.
B “Calc’nClean”
The “Calc’nClean” function helps to remove
scale particles out of the steam chamber.
Use this function approximately every 2
weeks if the water in your area is very hard.
Follow the procedure described below:
1 Unplug the iron from the mains socket,
and ll the water tank (11) with water.
45º
2 Set the temperature selector (15) to the
“max” position and plug in the iron.
3 After the necessary warm-up period, the
“TempOK” lights inside the temperature
control stop ashing. Then, unplug the
iron (very important!).
4 Hold the iron over a sink. Press the
“Calc’nClean” button (16) and shake the
iron until approximately one third of the
water capacity of the tank is evaporated.
Boiling water and steam will come out,
carrying scale or deposits that might be
there.
Loading ...
Loading ...
Loading ...