Loading ...
Loading ...
Loading ...
8 /24 EN
Refrigerator / User Guide
3 Installation
3.1. Right place for installation
Contact the Authorized Service for
the product's installation. To ready
the product for installation, see the
information in the user guide and make
sure the electric and water utilities are
as required. If not, call an electrician
and plumber to arrange the utilities as
necessary.
B
WARNING: The manufacturer
assumes no responsblty for
any damage caused by the work
carred out by unauthorzed
persons.
B
WARNING: The product’s power
cable must be unplugged durng
nstallaton. Falure to do so may
result n death or serous njures!
A
WARNING: If the door span
s too narrow for the product to
pass, remove the door and turn
the product sdeways; f ths does
not work, contact the authorzed
servce.
• Placetheproductonaflatsurfaceto
avoid vibration.
• Placetheproductatleast30cmaway
from the heater, stove and similar
sources of heat and at least 5 cm away
from electric ovens.
• Donotexposetheproductto
direct sunlight or keep in damp
environments.
• Theproductrequiresadequateair
circulation to function efficiently.
• Iftheproductwillbeplacedinan
alcove, remember to leave at least 5
cm distance between the product and
the ceiling and the walls.
• Donotinstalltheproductin
environments with temperatures
below -5°C.
3.2. Attaching the plastic wedges
Usetheplasticwedgesintheprovided
with the product to provide sufficient
space for air circulation between the
product and the wall.
1. To attach the wedges, remove
the screws on the product and use the
screws provided with the wedges.
2. Attach 2 plastic wedges on the
ventilation cover as shown in the figure.
Loading ...
Loading ...
Loading ...