Loading ...
Loading ...
Loading ...
English
40
DVD Menu Options (continued)
TIPS: The underlined option is the factory default setting.
Press W to go back to previous menu item. Press SETUP to exit the menu item.
Digital Output
Set the Digital Output according to your
optional audio equipment connection.
{ All }
Select this if the connected device has a
built-in multichannel decoder that
supports one of the multichannel audio
format (Dolby Digital, MPEG-2).
{ PCM Only }
Select this if the connected device is not
capable of decoding multichannel audio.
The DVD player will convert the Dolby
Digital and MPEG-2 multichannel signals
to PCM (Pulse Code Modulation).
{ Off }
To deactivate the digital audio output.
For example, if you use the AUDIO OUT
jacks to connect to a TV or stereo
system.
LPCM Output
If you connect the DVD player to a PCM
compatible receiver via the digital
terminals, such as coaxial or optical etc,
you may need to adjust ‘LPCM Output’.
{ 48K }
Playback a disc recorded at the sampling
rate of 48kHz.
{ 96K }
Playback a disc recorded at the sampling
rate of 96kHz. This rate can only be
achieved in Stereo-Classic (Flat) mode.
Tip:
– Discs are recorded at a certain sampling
rate. The higher the sampling rate, the better
sound quality. LPCM Output can be selected
only when PCM Only is activated.
HDMI Audio Setup
This function allows you to set the digital
audio to output via HDMI cable.
A In ‘Audio Setup Page’, press S T to
select { HDMI Audio Setup }, then
press X.
{ On }
To enable the HDMI digital audio to
output via HDMI cable.
{ Off }
To disable the HDMI digital audio to
output via HDMI cable.
B Use ST to select a setting and press
OK to con rm.
1_dvp5982MKII_37_eng 4.indd 401_dvp5982MKII_37_eng 4.indd 40 2007-10-11 3:47:36 PM2007-10-11 3:47:36 PM
Loading ...
Loading ...
Loading ...