Loading ...
Loading ...
Loading ...
4
FEATURES AT A GLANCE
Features may vary according to model
Your dishwasher cleans by spraying a mixture of hot water and detergent through the spray arms
against soiled surfaces. First, the dishwasher drains for a few seconds to remove soils dropped while
loading, then fi lls with water covering the fi lter area. Water is then pumped through the spray arms. Soil
particles go through and across the fi lter and down the drain as the water is pumped out. This series of
steps are repeated as needed. The number of water fi lls varies with the cycle being used.
Wash Cycle Selections
Cycle times are approximate and will vary with
options selected. Hot water is necessary to
activate dishwasher detergent and melt fatty food
soils. An automatic sensor will check the incoming
water temperature and, if it is not hot enough,
the cycle will be lengthened for automatic water
heating in the main wash and fi nal rinse of all
cycles. This happens even when HIGH option
has not be selected. When HIGH is selected, an
even higher temperature will be reached to handle
heavier soil loads.
NOTE
ë
Your dishwasher uses a DishSense
TM
Technology to understand how much food is on the dishes and then
adjusts the cycle accordingly.
Recommended Cycle for typical
use:
The NORMAL WASH cycle with its factory default
options of SPRAY and AIR DRY together provides
the best all around performance. This cycle
selection is recommended for everyday use and is
suitable for a large range of both dish load sizes
and food quantities remaining on those dishes.
Tub Gasket
Middle Spray
Arm
Lower Rack
Cup Shelves
Lower Spray
Arm
Detergent
Dispenser
Rinse Aid
Dispenser
Upper Spray Arm
Upper Rack
Silverware
Basket
Filter
Serial Label
(located on right
side of door)
Soft Grip Rack
Adjustable
Rack
Mechanism
Flex Wash
Loading ...
Loading ...
Loading ...