Loading ...
Loading ...
Loading ...
CLEANING
WATER DISPENSER
WATER
PUSH
Grille -
Wipe with a wet cloth, and dry with a dry cloth.
2. Clean the inside and outside of the water tank
with diswashing detergent and rinse
3. Clean the inside and outside of the cap
with diswashing detergent and rinse
Water Tank -
1. Putting the Water
(it could be filled like shows fig. 1 pulling the tank gate).
-
- Do not use liquids containing sugar or carbonated drinks like soda
NOTE
2. Disassembly
NOTE
3. Assembly
It is not necessary to remove the tank to fill it with water.
Before closing door, close the water cap to prevent water from
spilling out.
Lift the water tank, gripping it from the sides then from the bottom
of the tank.
When removing the Water Tank, dispense all the water from the
dispenser first.
Refit the water tank by aligning it with the basket and slowly
lowering it into the correct position, ensuring that the valve is
pushed down snugly into the outlet hole of the door.
Cleaning the Water Tank -
1. Remove the water tank as per the Disassembly
instructions then remove the tank cover.
throughly under warm running water. Dry the
water with a cloth.
throughly under warm running water. Dry the
water with a cloth.
Caution
1. Use lukewarm water when cleaning.
2. Do not use anything other than water.
22
Loading ...
Loading ...
Loading ...