Loading ...
Loading ...
Loading ...
Fader
The display will show ⬙FAD 00⬙ to indicate that you can
set the Fader function. Turn the ROTARY knob clockwise
to transfer the sound to the front; the display will show
⬙FADF01⬙. Turn the ROTARY knob counterclockwise to
transfer the sound to the back; the display will show
⬙FADR01⬙. The fader levels are set from 0 to 15.
Loudness
The display will show ⬙LOUD 00⬙ to indicate that you can
set the loudness (enhanced sound) function. Turn the
ROTARY knob clockwise to enable the loudness function
at level 1; the display will show ⬙LOUD 01⬙ and the
LOUD flag will be enabled. The radio supports three
loudness levels.
Volume
Turn the ROTARY knob clockwise to increase the vol-
ume. Turning it counterclockwise will lower the volume.
The volume can be set between 0 and 30.
Tuner Mode (AM/FM Radio)
When you enter TUNER mode, the radio tunes to the
most recently selected station and will remain on the
most recently selected frequency band.
In this mode of operation the display will show one of the
following 5 codes:
CH (Channel)
When this is on, it indicates that the current radio station
is stored in memory. The code is only shown when the
tuned frequency is showing on the display.
ST (Stereo)
When this is on, it indicates that the radio station is
transmitting a 19 kHz signal (pilot).
4
UNDERSTANDING YOUR INSTRUMENT PANEL 157
Loading ...
Loading ...
Loading ...