Loading ...
Loading ...
Loading ...
6
Cycle Status Lights
The Cycle Status Lights show the progress of
a cycle. At each stage of the process, you may notice
sounds or pauses that are different from traditional
washers.
Low Detergent
This will light if there is enough detergent in the
Optimal Dispense cartridge for only a few more
cycles.
Refill Detergent
This will light if there is no detergent in
the Optimal Dispense cartridge.
Door Locked
Door Locked will light to indicate that the door is locked and
cannot be opened without first pausing or canceling the cycle.
Sensing
When START is touched and held, the washer will first
perform a self-test on the door lock mechanism and the sensing
light will come on. You will hear a click, the drum will make a
partial turn, and the door will unlock briefly before locking again.
Once the door has locked the second time, the washer will begin
tumbling and adding water. This sensing process will continue
throughout the cycle. You may also hear water flowing through
the dispenser, adding detergent to the load.
After the load size is sensed, the estimated time based on load
size will be displayed. The actual cycle time may be lengthened;
however, the display will continue to show the estimated time.
The sensing light will blink once a second at various times during
the cycle, such as when the washer is reducing extra suds.
Add a Garment
When Add a Garment is lit, you may pause the washer, open
the door, and add items.
Steaming
This will light to show that the cycle is using steam for added
cleaning power.
Done
Once the cycle is complete, this light will come on.
Remove the load promptly for best results.
CONTROL PANEL AND FEATURES
Loading ...
Loading ...
Loading ...