Loading ...
Loading ...
4 5
DIAGRAM OF PARTS
FILTER BASKET
PERMANENT
FILTER
DRINKING
MUG (OUTER
PLASTIC LAYER)
BOTTOM RIM
DRINKING
MUG (INNER
STAINLESS
STEEL LAYER)
POWER ON
SWITCH
WATER
RESERVOIR
PERMANENT
FILTER BREWING
BASKET
TOP COVER
PLATFORM
MUG LID
Attach the
mug lid
onto the
handle of
the brew
ADDED CONVENIENCE
IMPORTANT: Clean Your Mr. Coffee
®
Personal Coffee
Brewer Before Use!
Wash stainless steel mug, mug lid and permanent
brewing basket in water with mild detergent.
Rinse them with water thoroughly. Follow steps below
(using water only) to clean the inside of your coffee
brewer.
BREWING COFFEE
1. Open the top cover.
2. Fill the water reservoir with fresh tap water up to
the MAX (500mL) indication. Do not overfill.
3. Place mug on the platform.
Mr. Coffee coffee mug has a maximum capacity of 500mL.
CAUTION: To avoid risk of scalding or other injury, do
not brew coffee using other container.
4. Fill permanent filter with coffee ground. The
permanent filter can contain approximately 25g of
coffee ground. The amount of coffee ground may
vary depending on the fineness of coffee ground.
5. The brew basket can also support 4 cup paper
filters if desired.
6. Close top cover.
7. Press the Power ON switch “I” to switch on the
appliance. The Power switch will illuminate to
indicate that brewing process has started. Let
the coffee passes through the filter into the mug.
the coffee maker will automatically shut off when
brewing is completed. During brewing cycle, you
can always unplug to stop brewing.
NOTE: The Mr. Coffee
®
Personal Coffee Brewer can
also be used to heat up water for instant food and
BVMC-MLXX_15ESM2.indd 5-6 8/12/15 09:15
Loading ...
Loading ...
Loading ...