User Manual - Page 258

For 2019 Equinox LT .

Loading ...
Loading ...
Loading ...
Chevrolet Equinox Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-
12145779) - 2019 - crc - 3/29/18
Driving and Operating 257
FWD Shown, AWD Similar
3. Turn the drain plug
counterclockwise using a
suitable tool.
4. With the engine off, press and
hold ENGINE START/STOP
without applying the brake for
five seconds to place the
vehicle in Service Mode. See
Ignition Positions 0 194. Wait
approximately five seconds,
and then press ENGINE
START/STOP again to turn it
off. This operation will enhance
water flow out of the filter. The
filter is drained as soon as
diesel fuel emerges from
the port.
5. Retighten the drain plug by
turning it clockwise.
6. Properly dispose of the water
contaminated fuel.
7. Start the engine and let it run
for a few minutes. During the
draining process, air may have
entered the fuel system. If the
engine stalls, the fuel system
may need to be primed. See
Fuel Priming following.
Fuel Priming
For the fuel system to work properly,
air cannot be in the fuel lines. If air
gets in, the engine may not start
and the fuel lines will need to be
primed before operating the vehicle.
If air is present, the following may
have happened:
.
The vehicle ran out of fuel.
.
The fuel filter was removed.
.
The fuel lines were removed or
disconnected.
.
The fuel filter water drain valve
was opened while the engine
was running.
To prime the fuel lines:
1. With the engine off, press and
hold ENGINE START/STOP
without applying the brake for
five seconds to place the
vehicle in Service Mode. See
Ignition Positions 0 194. Wait
approximately five seconds
and press ENGINE START/
STOP again to turn it off. Do
this step three times or more
while the engine is off.
2. Press and hold ENGINE
START/STOP while applying
the brake for a maximum of
40 seconds at a time, with
five seconds between attempts,
until the engine starts. If the
engine tries to run, but does
not run smoothly, increase the
rpms slightly by using the
accelerator pedal. This will help
force air through the system.
3. Repeat Step 2 if the engine
stalls and will not restart.
Loading ...
Loading ...
Loading ...