Loading ...
Loading ...
Loading ...
8 49-80824 Rev. 1
Using the Oven
Wall Oven
Double Wall Oven Controls
378694
10 11
14 1213
251
1. Upper Oven and Lower Oven: Designates which oven
to use. Press the Upper Oven or Lower Oven pad to select an
oven, then press the desired cooking mode pad. The oven control
will default to the upper oven.
2. Convection Cooking Modes: Convection cooking
modes use increased air circulation to improve performance. The
type of benefit depends on the mode. Your oven has the following
convection cooking modes: Bake, Bake Multi Rack, Roast, Broil Hi,
Broil Lo, and Broil Crisp. See the Cooking Modes section for more
information.
3. Traditional Cooking Modes: Your oven has the
following traditional cooking modes: Bake, Broil Hi, Broil Lo, Proof
and Warm. See the Cooking Modes section for more information.
4. Clean: Your oven has two cleaning modes: Self Clean and
Steam Clean. See the Cleaning the Oven section for important
information about using these modes.
5. Start: Must be pressed to start any cooking, cleaning, or timed
function.
6. Cancel/Off: Cancels ALL oven operations except the clock and
timer.
7. Cook Time: Counts down cooking time and turns off the oven
when the cooking time is complete. Press the Cook Time pad, use
the number pads to program a cooking time in hours and minutes,
then press Start. This can only be used with Traditional Bake,
Convection Bake, Convection Bake Multi, and Convection Roast.
8. Clock: Sets the oven clock time. Press the Clock pad and the
number pads to program the clock. Make sure to select AM or PM.
Press Start to save the time.
9. Timer: Works as a countdown timer. Press the Timer pad and the
number pads to program the time in hours and minutes. Press
the Start pad. The oven will continue to operate when the timer
countdown is complete. To turn the timer off press the Timer pad.
10. Delay Time: Delays when the oven will turn on. Use this to
set a time when you want the oven to start. Press the Delay Time
pad and use the number pads to program the time of day for the
oven to turn on. Press the desired cooking mode and temperature
then press Start. A cook time may also be programmed if desired.
This can only be used with Traditional Bake, Convection Bake,
Convection Bake Multi Rack, Convection Roast and Self-Clean
NOTE: When using the delay time feature, foods that spoil easily—
such as milk, eggs, fish, stuffings, poultry and pork—should not be
allowed to sit for more than 1 hour before or after cooking. Room
temperature promotes the growth of harmful bacteria. Be sure that
the oven light is off because heat from the bulb will speed harmful
bacteria growth.
11. Probe: Monitors internal food temperature and turns the oven off
when the food reaches the programmed temperature. Select upper
or lower, insert the probe, program the cooking mode, and program
the probe temperature. See the Cooking Modes section for more
information. The probe can only be used with Traditional Bake,
Convection Bake, and Convection Roast.
12. Oven Light(s): Turns the oven light(s) on or off.
13. Remote Enable (on some models):
CONNECTING YOUR OVEN
Off - Oven is not connected. Open the app then press and hold
Remote Enable pad for 5 seconds to begin the connecting
process.
Slow flash - Oven is in discovery mode and looking for a network.
Rapid flash - An error occurred during the connecting process.
Solid - Both ovens are connected to the network and can be
remotely controlled by a connected mobile device when in
operation, but cannot be started remotely
REMOTE STARTING YOUR OVEN
REMOTE
To be able to start the oven remotely, press the Remote Enable
pad and the REMOTE icon will turn on in the display. Either oven
can now be remotely started with a connected device. Opening
any oven door or turning off either oven will turn off the REMOTE
icon. The REMOTE icon must be lit to start the oven remotely. The
REMOTE icon is not required to change the oven settings or to turn
either oven off.
After using the oven, remember to verify that the REMOTE icon is
lit if you wish to start an oven remotely in the future.
14. Lock Controls: Locks out the control so that pressing the
pads does not activate the controls. Press and hold the Lock
Controls pad for three seconds to lock or unlock the control.
Cancel/Off is always active, even when the control is locked.
Loading ...
Loading ...
Loading ...