Loading ...
Loading ...
Loading ...
254 If and when
Applies to the model: IBIZA ST
Changing bulbs
Fig. 182 Removing the
bulb holder
– Remove the bulb holder by pressing the fastening clips
B
⇒ Fig. 182 and pulling outwards.
– Replace the faulty bulb, rotating it to the left and outwards.
– To refit follow the steps in reverse order, taking special care
when fitting the bulb holder.
Changing bulbs. LED lamps
Carry out the same operations as in lights fitted with bulbs.
If necessary, remove the socket, as if it were a bulb.
If the brake light and/or side light with LEDs have to be replaced, the tail
light must be replaced.
Changing the side and interior light bulbs
Side turn signal bulbs
Fig. 183 Side turn sig-
nals
– Press the turn signal to the left or to the right to remove the
bulb.
– Remove the bulb holder from the turn signal.
– Remove the failed bulb and replace with a new bulb.
– Insert the bulb holder in the turn signal guide until it clicks into
place.
– First fit the turn signal in the opening in the chassis, fastening
the tabs
1
⇒ Fig. 183, and then fit in the bulb as shown by the
arrow
2
⇒ Fig. 183.
Loading ...
Loading ...
Loading ...