Loading ...
Loading ...
Loading ...
English 21
Care and Maintenance
Reassembling the Burner Heads and Caps
Dual Burner Head/Caps
1. Orient the burner head so the electrode opening
aligns with the electrode itself.
2. Install the burner head so the electrode passes
through its opening in the head. Lay the burner
head flat on the base.
3. Size the burner caps to the burners, then re-install
them on the heads.
CAUTION
Each cap fits a specific burner head. Make sure all
caps lie flat on the correct head.
Round
Burner Head/Caps
1. Put the burner heads on the burner bases. The
bottom of the head fits inside the top of the base.
2. Turn the head until it drops in place, then wiggle
it to ensure it is seated properly.
3. Place the burner caps on the burner rings. The
ridge on the bottom of each cap fits around the
top of the ring.
CAUTION
Verify that all burner parts are properly seated.
Loading ...
Loading ...
Loading ...