Loading ...
Loading ...
Loading ...
Using two or more people, grasp sides of dishwasher door
frame and place dishwasher on its back.
Using a flat-blade screwdriver, turn the plastic fasteners 1/4turn
counterclockwise to unlock them. Remove the panel. Do not
remove tech sheet from access panel.
Using a 1,_,,hex head socket, nut driver or Torx®T20®
screwdriver, remove terminal box cover. Retain for later use.
0
Install a UL Listed/CSA Approved strain relief. Make sure
screwheads are facing to the left when tightening conduit nut.
Strain relief is provided with the power supply cord kit.
NOTE= If using Option B, proceed to "Determine Cabinet
Opening," to continue with the installation of your dishwasher.
Make Power Supply Cord Connection
Option A, Power Supply Cord;
0
Route cord so that it does not touch dishwasher motor to lower
part of dishwasher tub. Pull cord through strain relief in terminal
box.
12
Loading ...
Loading ...
Loading ...