Loading ...
Loading ...
Loading ...
Building in the appliance
35
Pushing the appliance into the
niche
Push the appliance into the niche,
taking care not to damage the power
cord and plumbed water connec-
tions.
If you are installing several appliances
side by side, now secure the appli-
ances to one another (see the instruc-
tions for the side-by-side installation
kit).
Remove the baseboard from the
appliance base as follows:
Carefully guide a flat-head screw-
driver through the grate in the base-
board on both sides and use it to
push the internal plastic latches out-
wards to release the baseboard.
5
6
Affix edge protection to the adja-
cent cabinet fronts.
Insert the plug connector at the back
of the appliance (see “Electrical con-
nection”).
Insert the plug into the electrical
socket.
The electrical socket should be close
to the appliance and easily accessi-
ble!
Otherwise, it must be possible to
switch the appliance on and off us-
ing an external all-pole switch with a
sufficient contact gap!
Risk of short circuit and over-
loading!
When installing appliances side by
side, each appliance must have its
own separate electrical socket.
Tip: To secure the power cord to pre-
vent it becoming caught:
Tie a piece of string to the middle of the
cord and as the appliance is being
pushed into the niche, pull the cord for-
ward underneath the appliance.
Carefully push the appliance into the
niche.
Loading ...
Loading ...
Loading ...