Loading ...
Loading ...
Loading ...
11EN
EN
FUNCTIONAL OVERVIEW
1. Q (standby/on) button
• Press to turn on the unit, or to turn the unit into the
standby mode. (To completely turn off the unit, you
must unplug the AC power cord.)
• Press and hold for 10 seconds to shut down the unit.
• This button lights up in red when the unit is in
standby mode and turns off when the power is on.
2. C (stop) button
• Touch to stop playback.
3. F (pause) button
• Touch to pause playback.
4. B (play) button
• Touch to start or resume playback.
5. A (open/close) button
• Touch to open or close the disc tray.
6. Disc tray
• Place a disc after opening the disc tray.
7. LED light
• Lights up in blue when the power is on and “Ambient
Light Control” is set to “On”. (Refer to page 50.)
8. Display
• Refer to “Front Panel Display” on page 14.
9. Infrared sensor window
• Receive signals from your remote control so that you
can control the unit from a distance.
10.SD card slot
• Insert an SD Memory Card and play back the
contents in it.
1. LAN terminal
• Use to connect a modem with LAN cable.
2. HDMI OUT jack
• Use to connect to a display with an HDMI compatible
port with an HDMI cable.
3. AUDIO OUT jacks
• Use to connect a TV monitor, an AV receiver /
amplifier or other device with an RCA audio cable.
4. COMPONENT VIDEO OUT jacks
• Use to connect a TV monitor with component video
inputs with an RCA component video cable.
5. AC power cord
• Connect to a standard AC outlet to supply power to
this unit.
• Unplug this cord from the AC outlet to completely
turn off the unit.
6. Wireless LAN terminal
• Use to connect the supplied USB wireless LAN
adapter.
7. DIGITAL OUT (COAXIAL) jack
• Use to connect an AV receiver / amplifier, Dolby
Digital / DTS decoder or other device with a digital
audio coaxial input jack with a digital audio coaxial
cable.
8. VIDEO OUT jack
• Use to connect a TV monitor, an AV receiver /
amplifier or other device with an RCA video cable.
9. 7.1ch AUDIO OUT jacks
• Use to connect to an AV receiver / amplifier with
7.1ch audio cable.
Front Panel
2
1
4 5 76
8
93 10
Rear Panel
SBL
SBR
SLCFL
FR SW SR
7.1 ch AUDIO OUT
DIGITAL OUT
PCM/BITSTREAM
PR/CR
PB/CB
Y
L
R
COMPONENT
VIDEO OUT
AUDIO
OUT
VIDEO
OUT
LAN
Wireless LAN
HDMI OUT
COAXIAL
1
76
3
8
4
2
9
5
Note
• Do not touch the inner pins of the jacks on the rear
panel. Electrostatic discharge may cause permanent
damage to the unit.
• This unit does not have the RF modulator.
• Do not insert a USB flash memory to the Wireless LAN
terminal. This unit is not designed to play back data
in USB flash memory.
Introduction Connections Basic Setup Playback OthersFunction Setup
Loading ...
Loading ...
Loading ...