Loading ...
Loading ...
Loading ...
9
Allow to stand for a minimum of 3 hours before plugging in to the mains
The temperature in the appliance is controlled by the temperature control dial
or thermostat located inside the fridge. Rotate the control dial up or down to
regulate the temperature inside the fridge.
On the temperature control dial, Off is the off setting, below MIN is the warmest
setting and above MAX is the coldest setting. Under normal conditions for a
product used in the majority of UK homes the temperature control should be
set between the MED and MAX positions.
Depending on the ambient temperature of the room the appliance is situated in,
you may need to adjust the temperature control dial; in a room with a high
ambient temperature the temperature control dial may need to be adjusted to a
colder setting (moved towards the MAX setting) or in a room with a low ambient
temperature the temperature control dial may need to be adjusted to a warmer
setting (moved towards the MED or MIN settings).
Setting the temperature control dial higher than the MAX setting should be used
as a rapid cool setting and should only be set for 2 hours before a large amount
of food is placed in the fridge. The temperature control should be put back to
between the MED and MAX setting after the food has been placed in the fridge,
if this is not done the temperature in the fridge compartment could fall below
0ยบC as the compressor will run continuously.
Usage
Loading ...
Loading ...
Loading ...