Loading ...
Loading ...
Loading ...
− If the driver’s
window senses any obstacle while it
is closing automatically, it will
reverse direction, and then stop. To
close t he window, remove the
obstacle, then use the window switch
again.
A ut o reverse st ops sensing when the
window is almost closed. You should
always check that a ll passengers and
objects are away from the window
before closing it.
If your vehicle’s battery is
disconnected or goes dead, or the
driver’s window fuse is removed, the
AUTO function will be disabled. The
power window system needs to be
reset after reconnecting the battery
or installing the fuse.
Start the engine. Push down and
hold t he driver’s window switch
until the window is fully open.
Pull and hold the driver’s window
switch to close the window
completely, then hold the switch
for about 2 seconds.
If the power windows do not operate
properly after resetting, have your
vehicle checked by your dealer.
1.
2.
Power Windows
AUTO REVERSE
Instruments and Controls
95
Loading ...
Loading ...
Loading ...