Loading ...
Loading ...
Loading ...
Operating the appliance en-us
17
Vacation mode
If leaving the appliance for a long period of time, you
can switch it over to energy-saving holiday mode.
Do not store any food in the refrigerator
compartment during this time.
The appliance automatically sets the following
temperatures:
■ Refrigerator compartment: +57 °F (+14 °C)
■ Freezer compartment: unchanged
Ice cube production is deactivated.
Switching Holiday mode on or off
Switching on:
1. Press " button to open the Settings menu.
2. Use ) button to move to the menu item Holiday
mode.
3. Press < button.
4. Press 8 button.
5. Confirm the following prompt with 8 button and
remove all perishable food items from the
refrigerator compartment.
The temperature is changed, and the display shows
the new temperature.
Switching off:
To switch off holiday mode, press = button on the
start screen.
Switching ice cube production on or off
9 CAUTION
Damage to the appliance!
Never store bottles or food in the ice cube
container, even for short periods. This can
block and damage the ice maker.
Ice cube production starts as soon as the appliance
has reached the set temperature.
Note: Ice cube production stops automatically when
the ice cube container is full.
Switching ice maker on or off
1. Press " button to open the Settings menu.
2. Use ) button to move to the menu item Ice cube
production.
3. Press </= button.
Reset water filter counter
After replacing the water filter, you have to reset the
water filter counter.
1. Press " button to open the Settings menu.
2. Use ) button to move to the menu item Reset
water filter counter.
3. Use 8 button to confirm, and confirm the query
again with 8 button.
Note: If you cancel the query or take longer than
10 seconds to make an input, the water filter counter
will not be reset.
Switching the water filter counter on and off
If you have replaced the water filter with a particle
filter, switch the water filter counter off. It is not
needed in this case as the particle filter does not
have to be replaced.
1. Press " button to open the Settings menu.
2. Use ( button to move to the Appliance settings
menu.
3. Press 8 button.
4. Press ) button to move to the menu item Water
filter counter.
5. To change the setting, press : button.
Eco mode
Eco mode switches the appliance to energy-saving
operation.
The appliance automatically sets the following
temperatures:
■ Refrigerator compartment: +43 °F (6 °C)
■ Freezer compartment: +3 °F (–16 °C)
Switching Eco mode on or off
1. Press " button to open the Settings menu.
2. Press ) button to move to the menu item Eco
mode.
3. Press </= button.
The temperature is changed and the display shows
the new temperature. When Eco mode is switched
off, the recommended temperature is set.
Note: You can also switch Eco mode on or off by
adjusting the temperature with -/+ buttons.
Self-test
This function can be used to start fault analysis on
your appliance.
~ "Appliance self-test" on page 27
Setting the brightness of the control panel
1. Press " button to open the Settings menu.
2. Use ( button to move to the menu item Appliance
settings.
3. Press 8 button.
4. Press : button to open the menu
item Brightness.
5. Press ( ) buttons to set the required brightness.
6. Press 8 button.
The setting is saved.
7. Press ; button to exit the menu.
Loading ...
Loading ...
Loading ...