Loading ...
Loading ...
Loading ...
Lights and visibility
Interior rear vision mirror with manual set-
tin
g f
or anti-d
azzle position
●
Position the small lever of the lower edge
of the mirror to face towards the rear.
WARNING
In the event that an automatic anti-dazzle
rear
vision mirror breaks, an electrolyte fluid
may leak. This could cause irritation to the
skin, eyes and respiratory organs. If you
come into contact with this liquid, it must be
rinsed with large quantities of water. If neces-
sary, get medial help.
CAUTION
In the event that an automatic anti-dazzle
rear
vision mirror breaks, an electrolyte fluid
may leak. This liquid attacks plastic surfaces.
Clean it with a wet sponge as soon as possi-
ble.
Note
●
If the light inc
ident in the interior rear vi-
sion mirror is obstructed (e.g. with the sun
blind*), the anti-dazzle rear vision mirror with
automatic setting will not operate perfectly.
●
When the interior lights are on or reverse
gear engaged, the mirrors do not darken with
automatic adjustment for anti-dazzle posi-
tion.
Adjusting the exterior rear-view mir-
rors
Fig. 149 Driver door: control for the exterior
mirr
or
.
Read the additional information carefully
›
›
›
page 21
Synchronized regulation of the exterior mir-
rors
●
In the Settings - Convenience menu,
select whether or not the exterior mirrors
should move in synchronisation.
●
Turn the knob to position L
1)
.
●
Adjust the left-hand exterior mirror. The
right exterior mirror will be adjusted at the
same time (synchronised).
●
If necessary the right exterior mirror adjust-
ment may need correcting. turn the control to
position R
1)
.
●
In the Easy Connect system the exterior mir-
rors can be adjusted using the
button
and the
S
ET
TINGS
function button.
Ti
lt
f
unction for front passenger exterior mir-
ror*
When parking backwards, and in order to be
able to see the kerb, the passenger side mir-
ror can be automatically tilted towards the
passenger to provide a better view of the
kerb. The control must be in the position R
1)
for this feature to be operational.
The mirror returns to its original position as
soon as you drive forward at over 15 km/h
(9 mph) or switch off the ignition. It also re-
turns to its original position if the position of
the control is adjusted.
Storing the rear view mirror settings for the
tilt function
●
Switch the ignition on.
●
Access the Easy Connect system, Menu,
, function Rear view mirrors and
»
1)
Regulation in right-hand drive vehicles is symmet-
rical.
151
Technical dataAdviceOperationEmergenciesSafety
Loading ...
Loading ...
Loading ...