Loading ...
Loading ...
Loading ...
20
NS-BK2TBS8/NS-BK2TBK8
www.insigniaproducts.com
Replacing kegs
1 Unplug your kegerator from the wall outlet to turn it off.
2 Close the main valve on the CO
2
tank.
3 Close the shut-off valve on the CO
2
regulator.
4 Pull the black handle on the keg coupler and press it upward to close
the connection between the beer keg and the keg coupler.
5 Pull on the tap handle(s) to help drain beer from the lines.
6 Disconnect the beer line and CO
2
gas line from the keg coupler.
7 Put the beer line in a bucket to drain the remaining beer from the line.
8 Remove the beer keg(s).
9 Remove the keg coupler(s) from the keg(s).
10 Follow the steps in "Installing the keg coupler" on page 14 to insert a
new keg.
Replacing the CO
2
tank
1 Unplug your kegerator from the wall outlet to turn it off.
2 Close the main valve on the CO
2
tank.
3 Close the shut-off valve on the CO
2
regulator.
4 Disconnect the CO
2
gas line from the keg coupler.
5 Remove the CO
2
tank.
6 Follow the steps in "Installing the CO2 regulator and tank" on page 12
to insert a new tank.
Storing your kegerator
If you will be away from your kegerator for more than three weeks:
1 Unplug your kegerator from the wall outlet to turn it off.
2 Remove all kegs and all beverages.
3 Clean and dry the interior of the kegerator.
4 Leave the door open slightly to avoid possible formation of
condensation, mold, or odor.
Caution
Use extreme caution with children. The unit should not be
accessible to child's play.
Loading ...
Loading ...
Loading ...