Loading ...
Loading ...
Loading ...
4
NAMES OF PARTS
NAME OF PARTS
INDOOR UNIT:
1. Front panel
2. Air inlet
3. Air filter
4. Air outlet
5. Horizontal air flow grille
6. Vertical air flow louver (inside)
7. Display window
OUTDOOR UNIT:
8. Connecting pipe
(Installertosupply)
9. Connecting cable
(Installertosupply)
10. Stop valve
•
Never activate any switches with
wet hands as it may cause an
electric shock.
• Never use the device for any other
purpose than the intended use.
Never place objects on the unit.
• Do not expose plants or animals
directly to the air flow.
• Never use combustible cleaning
agents as these could cause a fire
or deformation of the unit.
• Never place any burning objects
close to the device if they could be
directly affected by the emitted
air. (Candles etc)
• Never step onto the outdoor unit
and never place anything on it.
• Never use an unsteady or rusty
base for the outdoor unit
mounting.
• Never install the air conditioner in
places where combustible gas can
be emitted as emitted gas may
collect and cause an explosion.
• Never allow the air conditioner to
run for too long with the doors or
windows open.
• If the air conditioner is to be used
in conjunction with other heating
appliances, the air in the room
should be refreshed periodically,
• Always switch the unit off at the
Mains switch if the unit is not
going to be used for any lengthy
period of time.
• Always switch off the air
conditioner during an electrical
storm otherwise, electrical parts
may get damaged.
• Check that the condensate
drainage line is correctly
connected. If not, water will
escape onto furnishings in the
room
• For electrical safety purposes it is
recommended that unit is
installed with an earth leakage
circuit-breaker.
Loading ...
Loading ...
Loading ...