Loading ...
Loading ...
Loading ...
CAUTION!
Install the stability chain to
prevent the appliance from
tilting. The stability chain
only works when the
appliance is put in a correct
area.
1. Measure down 180 mm from the
appliance top surface, then measure
right 30 mm.
2. Mark the position of the wall and this
gives anchor point for the stability
chain.
30 mm
180 mm
3.5 Other technical data
WARNING!
These instructions are only
valid in the countries whose
symbols appear on this
booklet's cover.
Gas category: I2H
Gas supply: G20 (2H) 20 mbar
Voltage: 220-240 V
Frequency: 50 Hz
3.6 Gas burners
BURNER NORMAL POWER
kW
Natural Gas
INJECTOR MARK 1/100
mm
Btu/h
Auxiliary 1 70 3412
Semi-rapid 1.9 96 6483
Multi crown 3.4 136 11600
Top Oven 1.7 95 5804
Main Oven 1.7 95 5804
3.7 Gas Connection
Use a flexible pipe in compliance with
the regulation in force. Make sure they
do not come in touch with mobile parts
and are not squeezed.
WARNING!
Only a qualified and
competent person can do
the gas installation.
Before you connect te gas,
disconnect the appliance
from the electricity supply or
switch off the fuse in the fuse
box. Close the primary valve
of the gas supply.
ENGLISH 9
Loading ...
Loading ...
Loading ...