Loading ...
Loading ...
Loading ...
3
EN
Never immerse the appliance or its power cord in water or any other
liquid.
Given the diverse standards in effect, if the appliance is used in a
country other than that in which it is purchased, have it checked by an
Approved Service Centre.
Remove all packaging materials, stickers and accessories from inside
and outside of the appliance.
The appliance must be placed and used on a flat, stable, heat-resistant
work surface, away from water splashes.
Do not place or use this appliance in high humidity environments.
Do not place or use the induction plate on steel or aluminium surfaces.
Maintain a gap of at least 10cm (4 inches) on all sides of the appliance
to ensure adequate ventilation.
Never place or use the appliance close to a wall or below a wall
cupboard.
Never place or use the appliance below or close to easily inflammable
objects (e.g. curtains, etc.).
Never place or use the appliance on or close to a cooking hob or other
sources of heat.
People fitted with cardiac pacemakers or similar medical devices should
be kept away from the induction cooker when it is connected to the
power supply. If in any doubt consult a medical practitioner before
using this product to avoid any danger.
Unwind the power cord fully before use.
Do not use an extension lead. If you accept liability for doing so, only
use an extension lead which is in good condition, has a plug with an
earth connection and is suited to the power rating of the appliance.
Never leave the appliance unattended whilst connected to the power
supply, even if for a few moments, especially where children are present.
Do not let the power cord hang where children may reach it.
The power cord must never be close to or in contact with hot parts of
the appliance, close to sources of heat or resting on sharp edges.
Take all necessary precautions to prevent anyone tripping over an
extension cord.
Switch off and disconnect the appliance from the power supply when
not in use.
Never disconnect the plug by pulling on the power cord.
Inspect the appliance and power cord for signs of wear or damage prior
to connecting to the power supply.
Loading ...
Loading ...
Loading ...