Loading ...
Loading ...
Loading ...
5
Before first use
• The bread carriage levers will not stay down unless the toaster is
connected to the mains supply.
• Before using the toaster for the first time operate the toaster
without bread.
• As with all new electric heating elements, your toaster emits a
‘new’ smell when it is first switched on. This is quite normal and
not a cause for concern.
Operating the appliance
• On the four slice models, the toaster has two sides with controls
repeated for each half. Each half can be used together or
independently.
1 Select the desired level of browning on the browning control dial
fl.
2 After selecting the desired level, place your bread in the slots ⁄
and depress the bread carriage lever downwards until it locks.
3 After the set time has been reached the bread will pop up
automatically ready for removal from the slots. The bread carriage
lever will have returned to its upper position and the heating
element will have switched off.
WARNING: Do not wrap the cable around the main body of
the appliance during or after use.
ADDITIONAL FEATURES
Using the re-heat button
If your toast has popped up and gone cold, the toaster offers a
re-heat facility. To use, depress the relevant bread carriage
lever and press the re-heat button › immediately. The button
will illuminate and the toaster will operate for a short period re-
heating the bread.
Using the frozen button
To toast frozen bread do not adjust the browning control from
your normal setting. Place the bread in the bread slots as
normal, and press the frozen button ‹.
Using the cancel button
(Depends upon model)
If you wish to interrupt the toasting process, press the cancel
button fi.
Using the pause and check/cancel button
(Depends upon model)
If you wish to check the process of the toasting cycle, press the
Pause and check/cancel button fi. On pressing the button, the
bread carriage will pop up automatically for you to check. This
action will pause the heating elements, during this period the
function button lights will flash. If you have achieved the desired
level of browning remove the toast from the toaster. If longer
toasting is required, depress the bread carriage lever within five
seconds to resume the toasting cycle at the same stage it was
at when it was paused.
Hints and tips
• In order to achieve uniform browning, we recommend you wait a
minimum of 30 seconds between each toasting, so that the
control can be automatically reset.
• If toasting one slice only, you may need to adjust the browning
control to a slightly lower setting.
• Note you will also notice a slight variation in toast colour on one
side of a single slice.
• Stale bread toasts more rapidly than fresh bread. Therefore, the
browning control should be set at a lower setting than usual.
• All sorts of bread can be used as well as teacakes, small rolls etc.
Slices should not however be so thick as to cause burning or
jamming within the bread slots.
• If the bread in your toaster becomes jammed disconnect your
toaster at the socket, allow it to cool, then remove the bread.
• When toasting 2 or more slices it is recommended they are of
equal size and freshness.
• Allow the toaster to cool fully before putting away.
Cleaning and maintenance
1 After use and before cleaning, switch off at the mains, remove the
plug from the wall socket and wait for the toaster to cool.
2 Wipe the outside of the toaster with a damp cloth only and dry
with another cloth or tissue.
• NEVER use metal polish or coarse scouring agents and never
immerse your appliance in any sort of liquid.
• NEVER use any pointed or sharp articles for cleaning the inside,
otherwise the heating element will be damaged.
• NEVER use a brush or push your fingers or metal objects down
the slots.
Crumb tray
A
WARNING: Crumbs will accumulate in the crumb tray(s) and
could catch fire if not emptied regularly.
When the appliance has cooled down completely, tap the sides
of the case lightly to dislodge any crumbs lodged in the
appliance chamber and remove the crumb tray(s) ‡. Empty
the tray(s) and replace it.
Never operate the appliance without the crumb tray(s) fitted.
HELPLINE
If you have any difficulty with your appliance, do not hesitate to
call us.
We are more likely to be able to help than the store from where
you bought it.
Please have the following information ready to enable our staff
to deal with your query quickly.
• Name of the product.
• Model number as shown on the underside of the appliance.
• Serial number as shown on underside of the appliance.
o
TT242004MAUS Rev2.qxp_Morphy Richards 27/10/2014 16:40 Page 5
Loading ...
Loading ...
Loading ...