Loading ...
Loading ...
Loading ...
9
English
The following types of water cannot be used due to its high mineral content.
Tap water
Mineral water
Geothermal water
Acidulated water
Groundwater
Ionized Alkaline water
Caution:
Do not mix with anything.
Do not mix the water with any other substance, such as lotion, aromatic oil, etc.
Doing so may cause burns, malfunctions, or shorten the life of the main unit.
How to use the steamer
1
1
Insert the appliance plug into the main unit.
2
2
Plug in the plug into the power outlet.
3
3
Slide the power switch upwards to turn on the
appliance.
The steam is released after about 1 minute.
A whizzing may be heard. This is the sound of electric
discharge which is normal.
A little hot water may be sprayed out when the main
unit starts emitting steam. This is not a malfunction.
4
4
Direct the steam to your face.
Keep your face at least 20 cm (8”) away from
the nozzle.
When using the appliance for the first time, or if
it is difficult to judge the distance, use the
attached “Distance Guide” to determine the
correct distance between the nozzle and the
area to be exposed to steam.
To ensure that the steam covers your entire
face, direct the steam to the top of your chin.
20cm20cm
The steam stops after about 6 minutes when the water is filled to “FULL
mark and after about 3 minutes when the water is filled to “HALF” mark.
(The duration of steam changes with the amount of water that is filled)
When the remaining water is low, the way that the steam is emitted
changes. This is not a malfunction.
If there is no water in the water supply tank, no steam will emit from the
steam outlet. Please turn off the appliance and add water after allowing the
appliance to cool down for at least 10 minutes.
Loading ...
Loading ...
Loading ...