Loading ...
Loading ...
Loading ...
41OPERATION
ENGLISH
Using the Steam Fresh™ Cycle
1
Turn on the dryer and turn the cycle selector
knob to select the Steam Fresh™ cycle.
2
To add an option function, select Reduce Static,
or Wrinkle Care.
3
The display shows the load size (number of
items). Change the steam time by pressing the
More Time or Less Time buttons to t the size
of the load.
4
Press Start/Pause to start the cycle.
The Steam Options
The Reduce Static option injects steam late in the
drying cycle to reduce the static electricity caused by
dry fabrics rubbing together.
NOTE
• When Sensor Dry is selected with the Reduce
Static option, a Dry level of Less or Damp cannot be
selected.
• The Reduce Static option can also be selected
during Time Dry cycles.
• After the Steam option is selected in Time Dry, the
More Time or Less Time buttons will change the
steam time ONLY.
• Depending on the load (quantity of items), you can
change the amount of time for the cycle by pressing
the More Time or Less Time button. (Reduce
static: 7, 9, 11, 14, 16, or 18)
Adding Steam to a Standard Cycle
1
Turn on the dryer and turn the cycle selector
knob to select the desired cycle.
2
Use the cycle setting buttons to adjust the
settings for that cycle.
3
Press the Steam option button (Reduce Static,
or Wrinkle Care) for the desired steam option.
Then adjust for the load size using the More
Time or Less Time buttons.
4
Press Start/Pause to start the cycle.
NOTE
• Steam may not be clearly visible during the steam
cycles. This is normal.
• Do not use Steam Fresh™ with items such as wool,
wool blankets, leather jackets, silk, wet clothes,
lingerie, foam products, or electric blankets.
• For best results, load articles of similar size and
fabric type. Do not overload.
• When the lter/duct is clogged, the steam option
may not have optimal results.
• When the steam function is operating, the drum will
stop to allow steam to stay in the drum.
• The steam feeder must be lled with water up to the
lter screen. Otherwise, an error message will be
displayed.
Loading ...
Loading ...
Loading ...