Loading ...
Loading ...
Loading ...
6
CARE INSTRUCTIONS:
Clean String Light only with a dry, soft cloth. Do NOT use abrasive cleaners.
Installation with guide wire:
If you are installing the String Lights using a guide wire, use an S-hook or cable tie and
connect every bulb backing to the guide wire using the hole located on the top of the socket.
Connect guide wire to
building or structure
Connect guide wire to
building or structure
Guiding wire Connect back of bulb socket
using S-hook or cable tie
NOTICE: When connecting multiple cords together, create a knot with the cord ends
as shown below or use a plug protec
tor to prevent the plugs from pulling apart
during use.
2
1st String
Light Cord
2nd String
Light Cord
1
TROUBLESHOOTING
Issue
Light did not
come on initially
or no longer
comes on.
1. Bulb is burnt out/damaged
2. Bulb is not properly installed
3. String Light is not plugged in
1. Replace bulb
2. Reinstall bulb
3. Plug String Light into outlet
Possible Source
Resolution
Loading ...
Loading ...