Loading ...
Loading ...
Loading ...
Servicing Your Honda
73
Throttle
You can reduce throttle grip movement.
1. Remove the M6 × 6 screw (1) from the
throttle housing.
2.
Replace the M6 × 6 screw with throttle
stopper screw (2) provided and tighten it
fully.
When the M6 × 6 screw is installed, the throttle
can be fully opened.
When the throttle stopper screw is installed, the
throttle opening is restricted to approximately
50% and the maximum engine speed is limited.
Do not remove the screw except when
activating or deactivating the limiter.
Use only provided screws. Do not use any other
screw.
Never operate the motorcycle without either the
M6 × 6 screw or throttle stopper screw installed
as debris can enter the housing and cause the
throttle to bind.
Throttle Limiter Activation
RIGHT HANDLEBAR
(1)
(2)
(1) M6 × 6 screw
(2) throttle stopper screw
Loading ...
Loading ...
Loading ...