Loading ...
Loading ...
Loading ...
7
VQT4G28
∫ Attaching the Lens Hood
(Supplied Accessory)
Insert the lens hood into
the lens with the short
sides at the top and
bottom, and turn in the
direction of the arrow
until it stops.
E: Fit to the mark
∫ Temporarily Storing the Lens Hood
1 Turn the lens hood in the
direction of the arrow to
detach it.
2 Reverse the lens hood
and then attach it in the
same way as shown
previously.
•Hold the short sides of the flower shape lens
hood when attaching or detaching it.
•When taking pictures with the flash with the lens
hood attached, the lower portion of the screen
may turn dark (vignetting effect) and the control
of the flash may be disabled because the photo
flash may be obscured by the lens hood. We
recommend detaching the lens hood.
•When using the AF assist lamp in the dark,
detach the lens hood.
∫ Attaching Filters
≥ Vignetting may occur if using 2 or more
MC protectors (optional: DMW-LMCH58),
PL filters (optional: DMW-LPL58) or ND filters
(optional: DMW-LND58), or if using thick
protectors and/or filters.
≥ The filter may become impossible to remove if
excessively tightened, so please refrain from
tightening it too strongly.
≥ It is possible to attach the lens cap with the filter
already attached.
≥ You cannot attach a conversion lens or adaptor to
this lens. A filter may be used, but attaching any
other element may cause damage to the lens.
VQT4G28_ENG_SPA.book 7 ページ ２０１２年５月１６日 水曜日 午前１１時４３分
Loading ...
Loading ...
Loading ...