Loading ...
Loading ...
Loading ...
10
Control Lockout
Your control will allow you to lock down the touch
pads so they cannot be activated when pressed.
1. Press BAKE and BROIL HI/LO
at the same time for 2 seconds
until the display shows “SF.”
2. Press SELF CLEAN. The display
will show “LOC OFF.”
—Press SELF CLEAN again. The
display will show “LOC.”
3. Press START to activate the control
lockout feature and leave the control set in
this special features mode.
When this feature is on and the touch pads are
pressed the control will beep and the display will
show “LOC.”
NOTE: The control lockout mode will not affect the
clock, timer and oven light touch pads.
START
SELF
CLEAN
BROIL
HI/LO
BAKE
Fahrenheit or Centigrade Temperature Selection
Your oven control is set to use the Fahrenheit
temperature selections but you may change this to use
the Centigrade selections.
1. Press BAKE and BROIL HI/LO
at the same time for two seconds
until the display shows “SF.”
2. Press BROIL HI/LO. The display will
show “F” (Fahrenheit).
3. Press BROIL HI/LO again. The display
will show “C” (Centigrade).
4. Press START.
START
BROIL
HI/LO
BROIL
HI/LO
BROIL
HI/LO
BAKE
Changing the Speed of the + or – Pads
As you use the + or – pads when setting a time or temperature, you may
notice the display changes slowly. This special feature allows you to change
the speed. To set the speed you prefer, follow the steps below.
1. Press BAKE and BROIL HI/LO at the same time for 2
seconds until the display shows “SF.”
2. Press the + pad. The display will show you a set speed
between 1 and 5.
3. Press the + pad to increase the speed up to the number 5.
—Press the – pad to decrease the speed down to the number 1.
4. Press START to activate the setting and leave the
control set in this special features mode.
START
TEMP
BROIL
HI/LO
BAKE
SPECIAL FEATURES
OF YOUR OVEN CONTROL
(continued)
Loading ...
Loading ...
Loading ...