Loading ...
Loading ...
Loading ...
en Installation
14
Fitting the lower support frame
Fasten the upper and lower part of the support frame at
the specified total height using 10 screws.
Notes
■ Ensure that the lower support frame is in the correct
position. The open side must be facing the hob
control elements.
■ The support frame can be subsequently re-
positioned by loosening the securing screws.
Fitting the appliance
1. Hook the appliance from below into the support
frame.
Note: Ensure that the mains cable is not trapped.
2. Fasten the appliance to the support frame using
2 securing screws.
3. Hook in the retaining clip and screw tight.
Connecting the pipes
Note: If using an aluminium pipe, smooth the
connection area beforehand.
Exhaust-air pipe Ø 150 mm (recommended size)
Attach the exhaust-air pipe directly to the air-pipe
connector and seal.
Exhaust-air pipe Ø 120 mm
1. Attach the reducing connector directly to the air-pipe
connector.
2. Attach the exhaust air pipe to the reducing
connector.
3. Seal both joints appropriately.
([KDXVWDLU
PP
&LUFXODWHGDLU
PP
[
[
[
Loading ...
Loading ...