Loading ...
Loading ...
Loading ...
6
Following is a list of available parts and supplies which may be purchased separately. Please refer to the cover for contact and model
identification information.
Replacement Parts
Turntable
Turntable support and rollers
Turntable hub
Cooking rack
Rack clip
Rack support
Grease filter
Charcoal filter
Cooktop light bulb
Cavity light bulb
Provided Accessories
Convection rack
Steamer vessel
Cleaning Supplies
Heavy Duty Degreaser
affresh
®
Kitchen Appliance Cleaner
affresh
®
Stainless Steel Cleaner
affresh
®
Stainless Steel Wipes
ACCESSORIES
Scan the code at left with your mobile device, or visit www.whirlpool.com/product_help for recommendations
that may help you avoid a service call.
PROBLEM SOLVER
If you experience
Recommended Solutions
Microwave oven will
not operate
Check the following:
Household fuse or circuit breaker: If a household fuse has blown or a circuit breaker has tripped, replace
the fuse or reset the circuit breaker. If the problem continues, call an electrician.
Magnetron: Try to heat 1 cup (250 mL) of cold water for 2 minutes at 100% cooking power. If water does
not heat, try the steps in the bullets below. If microwave oven still does not operate, call for service.
Door: Firmly close door. On some models, if a packaging spacer is attached to inside of the door, remove
it, then firmly close door.
If a message about the door appears in the display, the door has been closed for 5 minutes or more
without the microwave oven being started. This occurs to avoid unintended starting of the microwave
oven. Open and close the door, then start the cycle.
Control: Make sure control is set properly. Make sure Control Lock is off. Make sure Demo mode (on
some models) is off.
Arcing in the
microwave oven
Check the following:
Soil buildup: Soil buildup on cavity walls, microwave inlet cover, cooking rack supports, and area where
the door touches the frame can cause arcing. See “General Cleaning” in the “Microwave Oven Care”
section.
Turntable alternates
rotation directions
This is normal and depends on motor rotation at the beginning of the cycle.
Display shows
messages
“Enter clock” with flashing digits means there has been a power failure. Reset the clock.
A letter followed by a number is an error indicator. Call for assistance.
Fan running during
cooktop usage
This is normal. The microwave oven’s cooling fan, which is separate from the vent fan, automatically
comes on during microwave oven operation to cool the microwave oven. It may also automatically come
on and cycle on and off to cool the microwave oven’s controls while the cooktop below is being used.
Radio, TV, or cordless
phone interference
Check the following:
Proximity: Move the receiver away from the microwave oven, or adjust the radio or TV antenna.
Soil: Make sure the microwave oven door and sealing surfaces are clean.
Frequency: Some 2.4 GHz-based cordless phones and home wireless networks may experience static
or noise while microwave oven is on. Use a corded phone, a different frequency cordless phone, or avoid
using these items during microwave oven operation.
Loading ...
Loading ...