Loading ...
Loading ...
Loading ...
763
Maintenance
Head lamp low beam
1.Turn the low beam on without driver aboard.
2.The cut-off line should be projected in the cut-off line shown in the picture.
3.When aiming the low beam, vertical aiming should be adjusted after adjusting the horizontal aiming.
4. If head lamp levelling device is equipped, adjust the head lamp levelling device switch with 0 positions.
OMD051055L
■ Based on 10m screen
EL(FL) UK 7.QXP 3/4/2015 9:07 PM Page 63
Loading ...
Loading ...
Loading ...