User Manual Pioneer AVH-1440NEX Multimedia DVD Receiver

Pioneer AVH-1440NEX Multimedia DVD Receiver - Use Manual - Use Guide PDF.
Documents: Go to download!
User Manual

• Owner's manual - (English)

Other Documents

• Installation Manual - (English)

Table of contents

• Parts and controls
• Basic Operation
• Bluetooth
• Troubleshooting
• Error messages

Owners' Guide Audio

Parts and controls

Main unit

1440NEX, 1400NEX

Remote control

2440NEX, 1440NEX

Basic Operation

Note on using the LCD panel

2440NEX, 2400NEX

WARNING

• Keep hands and fingers clear of this product when opening. closing. or adjusting the LCD panel. Be especially cautious of children’s hands and fingers.
• Do not use with the LCD panel left open. It may result in injury in the event of an accident.
• Close the LCD panel before putting the vehicle in motion. Driving with the LCD panel open may damage the unit. and any backup camera image shown through the LCD panel will not be visible.

CAUTION

• Do not open or close the LCD panel forcefully. It may cause a malfunction.
• Do not operate this product until the LCD panel has completely opened or closed. If this product is operated while the LCD panel is opening or closing. the LCD panel may stop at that angle for safety.
• Do not place glass or can on the open LCD panel.

Adjusting the LCD panel angle

2440NEX, 2400NEX

1. Press
2. Touch or to adjust the angle of the LCD panel.
3. Touch .
   Returns to the previous screen

Resetting the microprocessor

CAUTION

• Pressing the RESET button resets settings and recorded contents to the factory settings.
  - Do not perform this operation when a device is connected to this product.
  - Some of the settings and recorded contents will not be reset.
• The microprocessor must be reset under the following conditions:
  - Prior to using this product for the first time after installation.
  - If this product fails to operate properly.
  
  See other models: AVIC-W6500NEX AVIC-6201NEX PDP-5016HD AVH-X6700DVD AVH-X390BS
  - If there appears to be problems with the operation of the system.

1. Turn the ignition switch OFF.
2. Press RESET with a pen tip or other pointed tools
   Settings and recorded contents are reset to the factory settings

Preparing the remote control

2440NEX, 1440NEX.

Remove the insulation sheet before use.

WARNING

• Do not ingest the battery. Chemical Burn Hazard. (The remote control supplied with) This product contains a coin/button cell battery. If the coin/ button cell battery is swallowed. it can cause severe internal burns in just 2 hours and can lead to death. Keep new and used batteries away from children. If the battery compartment does not close securely. stop using the product and keep it away from children. If you think batteries might have been swallowed or placed inside any part of the body. seek immediate medical attention.
• Batteries (battery pack or batteries installed) must not be exposed to excessive heat such as sunshine. fire or the like.

CAUTION

• Remove the battery if the remote control is not used for a month or longer.
• There is a danger of explosion if the battery is incorrectly replaced. Replace only with the same or equivalent type.
• Do not handle the battery with metallic tools.
• Do not store the battery with metallic objects.
• If the battery leaks. wipe the remote control completely clean and install a new battery.
• When disposing of used batteries. please comply with governmental regulations or environmental public institutions’ rules that apply in your country/area.

Using the remote control

Point the remote control in the direction of the front panel to operate.

Note: The remote control may not function properly in direct sunlight.

Important:

• Do not store the remote control in high temperatures or direct sunlight.
• Do not let the remote control fall onto the floor, where it may become jammed under the brake or gas pedal

Starting up the unit

1. Start the engine to boot up the system.
   The [Select Program Language] screen appears
   Note: From the second time on, the screen shown will differ depending on the previous conditions
2. Touch the language
3. Touch
   The [Speaker Mode Settings] screen appears

4. Touch the speaker modes.
   [Standard Mode]
   4-speaker system with front and rear speakers. or a 6-speaker system with front and rear speakers and subwoofers.
   [Network Mode]
   3-way system with a high range speaker. middle range speaker and subwoofer (low range speaker) for reproduction of high. middle and low frequencies (bands).
   WARNING
   Do not use the unit in standard mode when a speaker system for 3-way network mode is connected to the unit. This may cause damage to the speakers.

5. Touch [OK]
   Initial Legal Disclaimer screen appears.

6. Touch [OK]
   The top menu screen appears.

NOTE:
Once the speaker mode is set, the setting cannot be changed unless this product is restored to the default settings. Restore the default settings to change the speaker mode setting (page 108).

Switching the speaker mode.

To change the speaker mode, you need to restore this product to the default settings.

1. Restore the default setting (page 108)

Using the touch panel

You can operate this product by touching the keys on the screen directly with your fingers.

Note: To protect the LCD screen from damage, be sure to touch the screen only with your finger gently

Common touch panel keys

: Returns to the previous screen

: Close the screen

Operating list screen

Operating the time bar

Operating the menu bar

1. Press
   the menu bar pops up on the screen

NOTE: The menu bar availability may vary depending on the activating source.

Top menu screen

Bluetooth

Bluetooth connection

1. Turn on the Bluetooth function on the device
2. Press
3. Touch then
   The Bluetooth screen appears
4. Touch [Connection]
5. Touch
   The unit starts to search for available devices, then displays them in the device list.

6. Touch the Bluetooth device name.
   After the device is successfully registered. a Bluetooth connection is established by the system. Once the connection is established. the device name is displayed on the list.

NOTES

• If five devices are already paired. [Memory Full] is displayed. Delete a paired device first (page 23).
• If your device supports SSP (Secure Simple Pairing). a six-digit number appears on the display of this product. Touch [Yes] to pair the device.
• If you try to connect an unconnected cellular phone while two cellular phones are already connected. the first one of the two connected cellular phones will be disconnected and the unconnected cellular phone will be connected instead.

TIPS

• The Bluetooth connection can also be made by detecting this product from the Bluetooth device. Before registration. make sure that [Visibility] in the [Bluetooth] menu is set to [On] (page 23). For details on Bluetooth device operations. refer to the operating instructions supplied with the Bluetooth device.
• Two cellular phones can be connected to this product at the same time (page 23).

Bluetooth settings

1. Press
2. Touch then

Caution:

Never this product off and disconnect the device while the Bluetooth setting operation is being processed.

Switching the connected Bluetooth device

After registering and connecting the Bluetooth devices to this product. you can switch among the devices using the switch devices key in the phone function and some audio sources.

• You can register up to five Bluetooth devices on this product (page 22).
• You can connect one of the registered devices to this product. In cases where the registered device is equipped with a phone function. a total of two devices can be connected at the same time when using the phone function. If two of the five registered devices are already connected. you can connect the remaining third device to use the audio function only from the switch devices key on the audio source screen.
• The icon for the cellular phone currently being used is displayed on the Phone menu screen. If you connect two cellular phones to this product at the same time. you can switch between the cellular phones using the switch devices key. The contents of the phone menu are memorized for each connected cellular phone (page 24).
• The switch devices key will appear for some audio sources. The audio source may automatically switch to another source depending on the selected device.

Hands-free phoning

To use this function you need to connect your cellular phone to this product via Bluetooth in advance (page 22).

CAUTION

For your safety. avoid talking on the phone as much as possible while driving.

Making a phone call

1. Press
2. Touch
   The phone menu screen appears
3. Touch one of the call icons on the phone menu screen.

To end the call

1. Touch

Using the preset dial lists

Registering a phone number

You can easily store up to six phone numbers per device as presets

1. Press
2. Touch
3. Touch or
   On the [ Phone Book ] screen, touch the desired name to display the contact's phone number
4. Touch

Dialing from the preset dial list

1. Touch
2. Touch the desired entry on the list to make a call.
   The dial screen appears and dialing starts.

Deleting a phone number

1. Press
2. Touch
3. Touch
4. Touch
5. Touch [Yes]

Receiving a phone call

1. Touch to answer the call
   Touch to end the call.

TIPS

• Touch while getting a call waiting, switch to the talking person
• Touch while getting a call waiting to reject the call

NOTE:
When two phones are connected at the same time. ifan incoming calls received on the second phone while you are talking on the first phone. the dial confirmation screen for the second phone will be displayed.

Voice recognition function ( for Iphone)

By connecting your iPhone to this product. you can use the voice recognition function (Giri Eyes Free Mode) on this product.

NOTES:

• When an iPhone is used, Sir Eyes Fre Mode is avalabe with ths product.
• In this chapter iPhone and iPod touch wil be referred toa "iPhone"

1. Press
2. Touch
3. Touch
   The voice recognition function lauches and the voice control screen appears.

TIPS

• You can also launch the voice recognition function by pressing .
• If two cellular phones are automatically connected to this product with the Bluetooth device auto connect function. the voice recognition function (St Eyes Free Mode) wil be seton the second phone.
• If you want to use the voice recognition function (Sr Eyes Free Mode) on anather connected iPhone. touch with numbered tothe other iPhone. The iPhone that you switch to willbe sets the current device.

Minimizing the dial confirmation screen

1. Touch .

TIP

To display the dial confirmation screen, touch again.

NOTES:

• The dial confirmation screen cannot be minimized on the AV operation screen.
• AV sources cannot be selected even ifthe dial confirmation screen is minimized while talking on the phone or receiving an incoming call.

Phone settings

1. Press
2. Touch then

Setting the private mode

During a conversation, you can switch to private mode (talk directly on your cellular phone).

1. Touch or to turn private mode on or off.

NOTES

• If two cellular phones are connected to this product and the fist phone is setto private mode. you ean receive incoming calls on the second phone while maintaining the callin progress on the first phone.
• When two cellular phones are connected to this product and private mode of the frst phone is turned off if an incoming call on the second phone is answered while acallis in progress on the fist phone or while dialing or receiving a cal on the first phone, the cal, dialing, or receiving on the frst phoneis ended.

Adjusting the other party's listening volume

This product can be adjusted to the other party's listening volume

1. Touch to switch between the three volume levels.

Notes for hands-free phoning

General notes

• Connection to all cellular phones featuring Bluetooth wireless technology is not guaranteed.
• The line-of-sight distance between this product and your cellular phone must be 10 meters or less when sending and receiving voice and data via Bluetooth technology.
• With some cellular phones. the ring sound may not be output from the speakers.
• If private mode is selected on the cellular phone. hands-free phoning may be disabled.

Registration and connection

• Cellular phone operations vary depending on the type of cellular phone. Refer to the instruction manual that came with your cellular phone for detailed instructions.
• When phone book transfer does not work. disconnect your phone and then perform pairing again from your phone to this product.

Making and receiving calls

• You may hear a noise in the following situations
  - When you answer the phone using the button on the phone
  - When the person on the other end ofthe line hangs up the phone.
• If the person on the other end of the line cannot hear the conversation due to an echo. decrease the volume level for hands-free phoning.
• With some cellular phones. even after you press the accept button on the cellular phone when a call comes in. hands-free phoning may not be performed.
• The registered name will appear if the phone number is already registered in the phone book. When the same phone number is registered under different names, only the phone number will be displayed.

The received call and dialed number histories

• You cannot make a call to the entry of an unknown user (no phone number) in the received call history.
• If calls are made by operating your cellular phone. no history data will be recorded in this product.

Phone book transfers

• If there are more than 1 000 phone book entries on your cellular phone. not all entries may download completely.
• Depending on the phone. this product may not display the phone book correctly.
• If the phone book in the phone contains image data, the phone book may not be transferred correctly.
• Depending on the cellular phone. phone book transfer may not be available.

Bluetooth audio

Before using the Bluetooth audio player, register and connect the device to this product (page 22).

NOTES

• Depending on the Bluetooth audio player connected to this produc. the available operations with tis product may be limited to the following two levels
  - A2DP (Advanced Audio Distribution Profil): Only playing back songs on your audio player is possible.
  - A2DP and AVRCP (Audio/Video Remote Control Profile: Playing back. pausing. selecting songs, etc, are possible.
• Depending on the Bluetooth device connected to this product. the available operations with this product may be limited or differ from the descriptions in this manual.
• While you are listening to songs on your Bluetooth device. refrain from operating the phone function as much as possible. you try operating. the signal may cause noise for song playback.
• When you ae talking on the Bluetooth device connected to this product via Bluetooth. it may pause playback.

1. Press
2. Touch then
   The system setting screen appears
3. Touch [AV source settings]
4. Confirm that [Bluetooth Audio] is turned on
5. Press
6. Touch
   The AV source screen appears
7. Touch [Bluetooth Audio]
   The Bluetooth audio playback screen appears

Basic operation

Bluetooth audio playback screen.

Troubleshooting

If you have problems operating thi product, refer to this section. The most common problems are listed below, along with likely causes and solutions, If a solution to your problem cannot be found here, contact your dealer or the nearest authorized Pioneer service facility.

Common problems

A black screen is displayed. and operation is not possible using the touch panel keys.

• [Power OFF] mode is on.
  Press any button on this product to release the mode.

Problems with the AV screen

CD or DVD playback is not possible.

• The discis inserted upside down.
  Insert the disc with the label upward.
• The discis dirty.
  Clean the dise.
• The discs cracked or otherwise damaged.
  Insert anormal, round disc.
• The files on the dise are in an irregular file format.
  Check the file format.
• The disc format cannot be played back.
  Replace the dise.
• The loaded discis a type this product cannot play.
  Check what type of disc itis.

The screen is covered by a caution message and the video cannot be shown.

• The parking brake lead is not connected or the parking brake is not applied.
  Connect the parking brake lead correctly. and apply the parking brake
• The parking brake interlock is activated.
  Park your vehicle ina safe place and apply the parking brake.

No video output from the connected equipment.

• The [AV Input] or [AUX Input] setting incorrect.
  Correct the settings.

The audio or video skips.

• This product is not firmly secured.
  Secure this product firmly.
• No sounds are produced.
  The volume level will not rise.
• Cables are not connected correctly.
  Connect the cables correctly.
• The system is performing stil. slow motion, or frame-by-frame playback with DVD-Video.
  There is no sound during stil. siow motion, or frame-by-frame playback with DVD-Video.
• The system is paused or performing fast reverse or forward during the disc playback.
  For the media other than music CD (CD-DAY. there is no sound on fast reverse or forward.

The Icon is displayed. and operation impossible.

• The operation is not compatible with the video configuration.
  The operation is not possible. (For example, the DVD playing does not feature that angle. audio system. subtitle language, etc)

Random playback in Music Browse mode: is released in the USB storage device.

• Random playback in Music Browse mode is canceled after the ignition switch is turned off (ACC OFF).
  Switch to Music Browse mode again and tum on random playback.

The picture stops (pauses) and this product cannot be operated.

• The reading of datais impossible during disc playback.
  Stop playback once, then restart.

The picture is stretched. with an incorrect, aspect ratio.

• The aspect setting is incorrect for the lay.
  Select the appropriate setting for that image.

A parental lock message is displayed and DVD playback is not possible.

• The parental locks on.
  Turn the parental lock off or change the level

The parental lock for DVD playback cannot be canceled.

• The code number is incorrect.
  Input the correct code number.

Playback is not with the audio language and subtitle language settings selected in [DVD Setup].

• The DVD playing does not feature dialog or subtitles in the language selected in [DVD Setup]. Switching to a selected language is rot possible ifthe language selected in [DVD Setup] is not recorded on the disc.

The picture is extremely unclear/ distorted and dark during playback.

• The disc features a signal to prohi copying. (Some discs may have this)
  Since this product is compatible with the copy guard analog copy protect system. the picture may suffer from horizontal stripes or other imperfections when a disc with that kind of protection signal is viewed on some displays. This is not a malfunction.

iPod cannot be operated.

• The iPod is frozen.
  Reconnect the iPod with the USB interface cable for iPod/iPhone.
  Update the iPod software version.
• An error has occurred.
  Reconnect the iPod with the USB interface cable for iPod/iPhone.
  Park your vehicle in a safe place. and then tur off the ignition switch (ACC OFF).
  Subsequently. turn the ignition switch to on (ACC ON) again. Update the iPod software version.
• Cables are not connected correctly.
  Connect the cables correctly.

Sound from the iPod cannot be heard.

• The audio output direction may switch automatically when the Bluetooth and USB connections are used at the same time.
  Use the iPod to change the a output direction.

No back camera image when the vehicle isin reverse.

• The back camera input setting on the receiver is set to Off
  Change the back camera setting to On in the settings menu. (Refer to the System Settings section of this manual to adjust)
• The camera input may be loose or not connected.
  Check the connection and make sure the male end of the camera is. connected to the brown input on the back of the receiver. (Refer to the installation manual)
• The reverse lead on the receiver may not be connected to the proper wire at the reverse lamp. Check the connection and make sure that the violet/white lead of the receiver is connected to the lead whose voltage changes when the shift lever is put in reverese. (Refer to the installation manual)

Black screen displayed when the vehicle isin reverse. with no camera installed.

• Back camera input is set to On.
  Turn the setting to Off in the settings menu. (Refer to the System Settings section of this manual to adjust)

Back image displayed when vehicle is not in reverse.

• The camera polarity is not set properly the Camera settings menu.
  Review System Settings section of this manual for steps to switch the camera polarity. Park in a safe place. then hile keeping your foot firmly on the brake. put the vehicle in reverse. access the System Settings menu. and change the camera polarity setting. Put vehicle back in park. (Refer to the System Settings section of this manual toadjust)

Problems with the phone screen

Dialing is impossible because the touch panel keys for dialing are inactive.

• Your phone is out of range for service.
  Retry after re-entering the range for service.
• The connection between the cellular phone and this product cannot be established.
  Perform the connection process.
• Of the two cellular phones connected to this product at the same time, if the first phone is dialing. ringing or a call is in progress, dialing cannot be performed on the second phone.
  When the operation on the first of the two cellular phones is completed. use the switch devices key to switch to the second phone and then dial.

Problems with Application screen

A black screen is displayed.

• While operating an application. the application was ended on the smartphone side.
  Press to display the top menu screen.
• The smartphone OS may be awaiting screen operation.
  Stop the vehicle in a safe place and check the screen on the smartphone.

The screen is displayed. but operation does not work at all.

• An error has occurred.
  Park your vehicle in a safe place. and then turn off the ignition switch (ACC OFF). Subsequently. turn the ignition switch to on (ACC ON) again.
  When an Android device's connected. disconnect the Bluetooth connection from this product and then reconnect

The smartphone was not charged.

• Charging stopped because the temperature of the smartphone rose due to prolonged use of the smartphone during charging.
  Disconnect the smartphone from the able. and wait until the smartphone cools down.
• More battery power was consumed than was gained from charging.
  This problem may be resolved by stopping any unnecessary services on the smartphone.

Sound from AppRadio Mode + of the Android device cannot be heard from the speakers of this unit.

• Depending on the Android device. the sound from AppRadio Mode + may not be output from the speakers of this unit.
  Switch to [Smartphone] in the [AppRadio Mode Sound] settings (page 89).

Error messages

When problems occur with this product, an error message appears on the display. Refer to the table below to identify the problem, then take the suggested corrective action. If the error persists, record the error message and contact your dealer or your nearest Pioneer service center.

Apple CarPlay

Attempting to connect to Apple CarPlay.

• Communication failed and the system is trying to connect.
• Wait for a while. Then, perform the actions below if the error message is still displayed.
  – Restart the iPhone.
  – Disconnect the cable from the iPhone, and then connect the iPhone again after a few seconds.
  – Turn the ignition switch to OFF and then to ON.

If the error message is still displayed after performing the above action, please contact your dealer or an authorized Pioneer Service Station.

Android Auto

2440NEX 2400NEX

Android Auto has stopped.

• The connected device is not compatible with Android Auto.
  – Check if the device is compatible with Android Auto.
• The startup of Android Auto failed for some reasons.
  – Disconnect the cable from the smartphone, and then connect the smartphone again after a few seconds.
  – Restart the smartphone.
  – Turn the ignition switch to OFF and then to ON.
  If the error message is still displayed after performing the above action, please contact your dealer or an authorized Pioneer Service Station.
• The time set in this product is not correct.
  – Check if the time is correctly set.

Bluetooth pairing failed. Please pair your Android phone manually.

• The Bluetooth pairing failed for some reasons.
  – Pair this product with the device manually.

To use Android Auto, please stop your car and check your Android phone.

• The default settings are displayed on the screen of the Android Auto compatible device or images are not output from the Android Auto compatible device.
  – Park your vehicle in a safe place, and follow the instructions displayed on the screen. If the error message is still displayed after performing on-screen instructions, please reconnect the device.

Common

• This product fails to operate or the speaker connection is incorrect; the protectivecircuit is activated.
  - Check the speaker connection. If the message fails to disappear even after the engine is switched off/on, contact your dealer or an authorized Pioneer Service Station for assistance.

Pandora

Error-19 (Communication error occurred)

• Communication failed
  - Disconnect the cable from the iPod. Once the iPod's main menu is displayed, reconnect the iPod and reset it

Our content licenses limit the number of tracks you may skip

• Skip limit reached.
  – Do not exceed the skip limit.
  – Pandora limits the total number of skips per hour.

Log in error

• You are not logged in to the Pandora application.
  – Please log in to the Pandora application.

Check USB

• The USB connector or USB cable has short-circuited.
  – Check that the USB connector or USB cable is not caught in something or damaged.
• The connected USB storage device consumes more than maximum allowable current. – Disconnect the USB storage device and do not use it. Turn the ignition switch to OFF, then to ACC or ON and then connect a compliant USB storage device.

Poor network connection. Listening will resume when it’s restored.

• The Pandora application is accessed/ relocated from outside the licensing region.
  – Access Pandora from within the licensing region.

Spotify

Skip limit reached.

• Skip limit reached.
  – Do not exceed the skip limit.
  – Spotify limits the total number of skips per hour. Check USB
• The USB connector or USB cable has short-circuited.
  – Check that the USB connector or USB cable is not caught in something or damaged.
• The connected USB storage device consumes more than maximum allowable current. – Disconnect the USB storage device and do not use it. Turn the ignition switch to OFF, then to ACC or ON and then connect a compliant USB storage device.

No Spotify

• The Spotify application is not installed in the connected device.
  – Install the Spotify application in your mobile device.

Update App

• The Spotify application is out of date.
  – Update to the latest Spotify application.

Login Please

• You are not logged in to the Spotify application.
  – Please log in to the Spotify application.

No Signal

• The connected device is out of area.
  – Connect the device to a network

SiriusXM® Satellite Radio

Check Antenna

• The antenna connection is incorrect.
  – Check the antenna connection. If the message fails to disappear even after the engine is switched off/on, contact your dealer or the nearest authorized Pioneer service center for assistance.

Check Tuner

• The SiriusXM Connect Vehicle Tuner connection is incorrect.
  – Check the tuner connection and battery voltage. If the message fails to disappear even after the engine is switched off/on, contact your dealer or the nearest authorized Pioneer service center for assistance.

No Signal

• The SiriusXM Connect Vehicle Tuner is having difficulty receiving the SiriusXM satellite signal.
  – Verify that your vehicle is outdoors with a clear view of the southern sky.
  – Verify that the SiriusXM magnetic mount antenna is mounted on a metal surface on the outside of the vehicle.
  – Move the SiriusXM antenna away from any obstructions.

No Content

• TuneScan™ is not available.
  – Perform the operation with another preset channel.

Channel Locked Please Enter the Lock Code

• Locked by the radio Parental Control feature.
  – Release the channel lock.

Memory Full

• The memory has become full while playback was paused.
  – Resume playback.

Memory Nearly Full

• The memory has become nearly full while playback was paused.
  – Resume playback.

There are no qualified TuneMix music

• There are no qualified TuneMix channels in this band.
  - Requires two or more qualified music channels to be stored as presets in the current band.

Disc

Error-02-XX/FF-FF

• The disc is dirty.
  – Clean the disc.
• The disc is scratched.
  – Replace the disc.
• The disc is loaded upside down.
  – Check that the disc is loaded correctly.
• There is an electrical or mechanical error.
  – Press the RESET button.

Different Region Disc

• The disc does not have the same region number as this product.
  – Replace the DVD with one bearing the correct region number.

Unplayable Disc

• This type of disc cannot be played on this product.
  – Replace the disc with one that can be played on this product.

Unplayable File

• This type of file cannot be played on this product.
  – Select a file that can be played.

Skipped

• The inserted disc contains DRM protected files.
  – The protected files are skipped.

Protect

• All the files on the inserted disc are embedded with DRM.
  – Replace the disc.

TEMP

• The temperature of this product is outside the normal operating range.
  – Wait until this product returns to a temperature within the normal operating limits.

Your device is not authorized to play this DivX protected video.

• This product’s DivX registration code has not been authorized by the DivX VOD contents provider.

Video frame rate not supported

• DivX file’s frame rate is more than 30 fps.
  – Select a file that can be played.

Audio Format not supported

• This type of file is not supported on this product.
  – Select a file that can be played

USB storage device

Error-02-9X/-DX

• Communication failed.
  – Turn the ignition switch OFF and back ON.
  – Disconnect the USB storage device.
  – Change to a different source. Then, return to the USB storage device.

Unplayable File

• There is no playable file in the USB storage device.
  – Check that the files in the USB storage device are compatible with this product.
• Security for the connected USB storage device is enabled.
  – Follow the USB storage device instructions to disable security.

Skipped

• The connected USB storage device contains DRM protected files.
  – The protected files are skipped.

Protect

• All the files on the connected USB storage device are embedded with DRM.
  – Replace the USB storage device.

Incompatible USB

• The connected USB storage device is not supported by this product.
  – Disconnect your device and replace it with a compatible USB storage device.

Check USB

• The USB connector or USB cable has short-circuited.
  – Check that the USB connector or USB cable is not caught in something or damaged.
• The connected USB storage device consumes more than maximum allowable current. – Disconnect the USB storage device and do not use it. Turn the ignition switch to OFF, then to ACC or ON and then connect a compliant USB storage device.

HUB Error

• The connected USB hub is not supported by this product.
  – Directly connect the USB storage device to this product.

No Response

• This product cannot recognize the connected USB storage device.
  – Disconnect the device and replace it with another USB storage device.

USB was disconnected for device protection. Do not re-insert this USB memory into the unit. Please restart the unit.

• The USB connector or USB cable has short-circuited
  – Check that the USB connector or USB cable is not caught in something or damaged.
• The connected USB storage device consumes more than maximum allowable current. – Disconnect the USB storage device and do not use it. Turn the ignition switch to OFF, then to ACC or ON and then connect a compliant USB storage device.
• The USB interface cable for iPod/iPhone has short-circuited.
  – Confirm that the USB interface cable for iPod/iPhone or USB cable is not caught in something or damaged.

Your device is not authorized to play this DivX protected video.

• This product’s DivX registration code has not been authorized by the DivX VOD contents provider.

Audio Format not supported

• This type of file is not supported on this product.
  – Select a file that can be played.

iPod

Error-02-6X/-9X/-DX

• iPod failure.
  – Disconnect the cable from the iPod. Once the iPod’s main menu is displayed, reconnect the iPod and reset it.

Error-02-67

• The iPod firmware version is old.
  – Update the iPod version.

Bluetooth

Error-10

• The power failed for the Bluetooth module of this product.
  – Turn the ignition switch to OFF and then to ON.

If the error message is still displayed after performing the above action, please contact your dealer or an authorized Pioneer Service Statio