Loading ...
Loading ...
Loading ...
One handle extension and two typical
extensions. To assemble, align the button
with the hole and slide the parts together.
To disconnect, press the button and pull
apart.
E162796
One wheel nut wrench. Slide over the
square end of the jack handle.
E162797
E227181
1. Fully insert the jack handle (with one
extension) through the bumper hole
and into the guide tube. You will feel
some resistance when you turn the jack
handle assembly.
2. Turn the handle counterclockwise and
lower the spare tire until you can slide
the tire rearward and the cable is slack.
3. Remove the retainer through the center
of the wheel. If your vehicle is equipped
with a tether, perform the following
steps.
E162800
4. Lift the spare tire on end to access the
tether attachment.
5. Use the lug wrench to remove the lug
nut from the spare tire tether.
6. If not replacing the spare or flat tire to
the underbody storage area, raise the
wheel retainer up into the installed
position.
7. Use the attached fastener strap (on
the spare tire tether) to attach the
tether end to the winch retainer prior
to raising to the installed position.
410
Super Duty (TFE) Canada/United States of America, enUSA, Edition date: 201709, First Printing
Wheels and Tires
Loading ...
Loading ...
Loading ...