Loading ...
Loading ...
Loading ...
11
Cleaning the Knobs and Trim Rings
1. Turn the knobs to the OFF position.
2. Disconnect the cooktop power plug from the
electrical outlet.
3. Grasp each knob and pull straight up to remove.
4. The trim rings can be removed for cleaning if
necessary: Grasp each trim ring and pull straight
up to remove.
5. Wash the knobs and trim rings with liquid dish-
washing soap.
6. Lay the trim rings over the valve stems. Move
the flame icon to the 9 o’clock position.
7. Gently twist untill the clasps align inside the
cylinder and the ring seats into place.
8. Push firmly into position. Repeat for each trim
ring.
9. To replace the knobs, align the “D-shaped”
opening on the bottom of the knob with the end
of the valve stem. Carefully push the knob until
it stops.
10. With dry hands, plug the cooktop power cord
into an electrical outlet.
Care and Cleaning
Cleaning the Griddle Accessory
Clean the griddle after each use. Wash it thoroughly
in hot soapy water to avoid stains from grease
build-up. The griddle is coated with a non-stick
coating to help with easy cleaning. Warm water
and liquid detergent are all that is needed. Remove
stubborn spots with a non-abrasive plastic mesh
pad. To prevent scratching, do not use abrasives or
abrasive cleaners. Use the soft side of a sponge to
scrub. Dry with a lint-free cloth.
Ordering Replacement Parts
The rubber feet on the bottom of the grate can be
replaced if they are lost or damaged.
If necessary, you may use a pair of needle nose
pliers to pull and remove the feet from the grate.
If any other parts need to be replaced, please refer
to the next page for part numbers and contact infor-
mation.
9:00 3:00
6:00
HDCT304 shown
Grates and Support Feet
Knobs and Trim Rings
Loading ...
Loading ...
Loading ...