Loading ...
Loading ...
Loading ...
91
MAINTENANCE
Cleaning and Storage
Removal from Storage
1. Check the battery electrolyte level and charge the battery if neces-
sary. Install it in the vehicle. Make sure the battery vent hose is
routed properly and that it's not pinched or restricted in any way.
2. Make sure the spark plug is tight.
3. Fill the fuel tank with fuel.
4. Check all the points listed in the Daily Pre-Ride Inspection section
on page 38. Tightness of the bolts, nuts and other fasteners should
be checked by an authorized Polaris dealer.
5. Lubricate at the intervals outlined in the Periodic Maintenance
Chart beginning on page 53.
Transporting the Vehicle
Follow these procedures when transporting the vehicle.
1. Place the transmission in neutral. Set the parking brake.
2. Stop the engine.
3. Turn the fuel valve off.
4. Remove the key to prevent loss during transporting.
5. Secure the fuel cap and seats.
6. Always tie the frame of the Polaris vehicle to the transporting unit
securely with suitable straps or rope. Do not attach tie straps to the
front control arm bolt pockets.
Loading ...
Loading ...
Loading ...