Loading ...
Loading ...
Loading ...
Maintenance
126
â– Replacing the Lamp
1 Turn off the projector, disconnect the
power plug from the AC outlet, and let
the projector stand for at least 1 hour.
2 Loosen a screw with a flathead screw-
driver and remove the lamp cover.
3 Loosen two screws, pull up the handle,
and then remove the lamp.
4 Fully insert a new lamp and secure it
with two screws.
* After the installation, be sure to
push down the handle.
5 Replace the lamp cover and tighten
the screw.
6 Turn on the projector.
7 Bring up the menu and select [System
settings] -> [Other settings] -> [Lamp
counter]. (P101)
8 Select [Reset] -> [OK] to reset the
lamp counter.
Lamp cover
Screw
Screw
Lamp
Handle
Lamp cover
Loading ...
Loading ...
Loading ...