Loading ...
Loading ...
Loading ...
139
[SC08550(ALL)08/95]
NOTE: If your vehicle is equipped with a
5-speed manual transaxle, and if your
speed increases above your set speed
while driving in 5 (fifth) gear on a
downhill grade, you may want to shift
to 4 (Fourth) gear to reduce vehicle
speed. Depressing the clutch pedal
cancels speed control, therefore speed
control must be reset by pressing the
SET ACCEL or RESUME switches.
Speed control cannot reduce the vehicle
speed if it goes above your set speed
on a downhill grade.
[SC09600(ALL)08/95]
RWARNING
To keep control of your vehicle, do not
use the speed control in heavy traffic or
on roads that are winding, slippery, or
unpaved.
[SC09650(ALL)08/95]
If you want to speed up momentarily or regain
preset speed on hills when the speed control is
operating, accelerate using the accelerator pedal.
Manually accelerating to a higher speed does not
interfere with the speed control; when you take
your foot off the accelerator, the vehicle returns
to the set speed.
[SC09700(ALL)09/95]
NOTE: Do not shift to N (Neutral) when using
the speed control. This will cause the
engine to overspeed.
[SC09750(ALL)09/95]
When driving uphill, especially with a heavy
load, significant speed drops may occur. If the
speed drops more than 8 to 14 mph
(13-23 km/h) the automatic speed control will
cancel. You may need to control your speed
manually while driving up steep grades in order
to maintain the selected speed.
File:07ctscr.ex
Update:Thu Sep 21 14:18:59 1995
Loading ...
Loading ...
Loading ...