Loading ...
Loading ...
Loading ...
4
II. REMOTE CONTROL
1. Point the remote control at the control panel display screen
and press the desired button.
2. The remote control will work at distances of up to 16 feet
and from an angle of 30 degrees to the left or right of the
fan control panel.
3. Remove batteries from remote control if remote control is to
be discarded.
4. [ ] FAN SPEED KEY
The On/Off, Timer and Oscillation key of the remote control look
and work exactly as those on the Control Panel. However, to adjust fan speed,
press the Fan Speed Key to change the setting to 1 (Low), 2 (Medium) or 3 (High).
1. Press dawn on the battery compartment cover
and slide it out.
2. Insert the batteries, making sure that the positive
terminals are facing the proper way.
3. Replace the cover.
BATTERIES INSTRUCTIONS
(not included)
1. “Do not dispose of batteries in fire, batteries may
explode or leak.”
2. -Do not mix old and new batteries.
3. -Do not mix alkaline, standard (carbon-zinc) or
rechargeable (nickel-cadmium) batteries.
BATTERY WARNING AS BELOW
- decreases the fan speed. When the fan is on, press this button to decrease
the fan speed. The display screen will show the decrease in speed from 3 (High)
to 2 (Medium) to 1 (Low).
5. ADJUSTING TIMER HOURS
- decreases the timer hours. After pressing the timer key , press button
to decrease the timer hours. The selected number of hours will appear briefly
on the display and then the display will return to the fan speed setting. To check
the Timer setting, press the Timer key again.
-increases the timer hours. After pressing the timer key , press button
to increase the timer hours.The selected number of hours will appear briefly on
the display and then the display will return to the fan speed setting. To check the
Timer setting, press the Timer key again.
Loading ...