Loading ...
Loading ...
Loading ...
9
Operation and Controls
CONTROL PANEL GUIDE
To obtain the best possible results for your freezer, it is important that you operate it properly. Your portable
freezer uses a digital control system for adjusting the thermostat.
1. Set Button
Press the Set Button to select desired temperature. Temperature setting cannot be changed unless Set but-
ton is pressed.
2 - 3 . Temperature Control Buttons
The temperature setting can be set within a range of -6°F to 50°F in 1°F increments. Press the Set button
and choose your desired temperature setting. For lower temperature setting, press the Down button and set
to a lower temperature value. For higher temperature setting, press the Up button and set to a higher temper-
ature value.
Once the desired temperature is set, the temperature display will flash 4 times confirming the chosen temper-
ature and then it will revert back to current temperature setting. The set temperature can be check by press-
ing the Set Button again.
4. Fast Freeze (FF)
Press the “FF” button to run the freezer on the “Fast Freeze” mode. The Fast Freeze mode rapidly cools the
unit to -6°F. The freezer will then maintain this temperature.
Note: Do not run the unit on “FF” (fast freeze) for more than four hours, as this might adversely affect the re-
frigeration system.
5. Run Indicator Light
The Run indicator light will illuminate a green light when the freezer is running on Normal Mode. A red light
will illuminate when the freezer is running on Fast Freeze Mode.
6. Low Indicator Light
The Low indicator light will flash a yellow light when the power is too low.
7. LED Display
The LED display shows the set temperature level from -6°F to 50°F.
LED LIGHT
This freezer comes equipped with energy saving LED light, which helps in lighting up the interior effectively. This
LED light comes on automatically when the freezer door is opened. The LED light will shut off once the freezer
door is completely closed.
Loading ...
Loading ...
Loading ...