Loading ...
Loading ...
Loading ...
STOP FROST SYSTEM (depending on the model)
The STOP FROST SYSTEM (available depending on the model) facilitates the defrost procedure for the
freezer compartment. The STOP FROST accessory (figure 1) is designed to collect some of the frost
that forms in the freezer compartment and it is easy to remove and clean, therefore reducing the time
needed to defrost the inside of the freezer compartment.
To remove the frost on the STOP FROST accessory follow the cleaning procedure demonstrated below.
PROCEDURE TO CLEAN THE STOP FROST
ACCESSORY
- Open the freezer compartment door.
- Unfasten the STOP FROST accessory (figureî2)
and remove it (figure 3). Note: if the accessory
is jammed or difficult to remove, do not keep
trying to remove it, but proceed with the
complete defrost of the freezer compartment.
- Close the door to the freezer compartment.
- Remove the frost on the accessory by rinsing it
under running (not hot) water (figure 4).
- Let the accessory drip dry and dry the plastic
parts with a soft cloth (figure 5).
- Reinsert the accessory by placing the back part
on the projections shown in figure 6-A, then
refasten the claps of the accessory to the lateral
bushes (figure 6-B).
- Close the door to the freezer compartment.
It is possible to clean the STOP FROST accessory
on its own without completely defrosting the
freezer compartment. Cleaning the STOP FROST
accessory regularly helps to reduce the need to
completely defrost the freezer compartment.
Note: the product specifications, including
volume and energy, are calculated without the
STOP FROST accessory.
7
Loading ...
Loading ...
Loading ...