Loading ...
Loading ...
Loading ...
9
ENG
ENGLISH
y
Illustrations in this document represent typical
procedures, so they may look different from the
actual product.
y
Do not carry the monitor upside down by just
holding the stand base. This may cause the
monitor to fall off the stand and could result in
personal injury.
y
When lifting or moving the monitor, do not
touch the monitor screen. The force applied to
the monitor screen may cause damage to it.
y
Do not apply foreign substances (oils,
lubricants, etc.) to the screw parts when
assembling the product. (Doing so may
damage the product.)
y
Applying excessive force when tightening
screws may cause damage to the monitor.
Damage caused in this way will not be covered
by the product warranty.
Mounting on a table
1
Lift and tilt the Monitor set into its upright
position on a table.
Leave a 100 mm (minimum) space from the
wall for proper ventilation.
100 mm
100 mm
100 mm
100 mm
CAUTION
CAUTION
NOTE
y
You can disassemble the stand in the re-
verse order of the assembly.
y
Unplug the power cord prior to moving or
installing the monitor. There is risk of electric
shock.
2
Connect the Power cord to the monitor, then
plug the power cord into the wall outlet.
3
Press the Power button on the front of the
monitor to turn on the monitor.
Loading ...
Loading ...
Loading ...