Loading ...
Loading ...
Loading ...
PAGE 4
Tools needed for
installation:
Level
Pliers
Utility
knife
Wrench
Scissors
Flat-blade
screwdriver
Electrical requirements
Grounding
prong
Figure 1
3-prong grounding-
type outlet
3-prong
grounding
plug
Power
supply cord
Plug into a grounded 3-prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions
can result in death, fire, or electrical
s
hock.
Electrical Shock Hazard
Parts supplied for
installation:
s
Remove parts from packages. Check
that all parts were included.
1 hose clamp
2 inlet hoses
4 flat water hose washers
2 front-leveling legs with nuts
1 drain hose
Recommended
grounding method
For your personal safety, this appliance
must be grounded. This appliance is
equipped with a power supply cord
having 3-prong grounding plug. To
minimize possible shock hazard, the cord
must be plugged into a mating 3-prong
grounding-type outlet, grounded in
accordance with local codes and
ordinances. See Figure 1. If a mating
outlet is not available, it is the personal
responsibility and obligation of the
customer to have a properly grounded
3-prong outlet installed by a qualified
electrician.
WARNING – Improper connection of the
equipment-grounding conductor can
result in a risk of electric shock. Check with
a qualified electrician or serviceman if you
are in doubt as to whether the appliance is
properly grounded. Do not modify the plug
provided with the appliance – if it will not fit
the outlet, have a proper outlet installed by
a qualified electrician.
WARNING
*0"
*0"
Front view
(door not shown)
Side view
Minimum installation spacing
Recessed area
instructions
This washer may be installed in a
recessed area or closet.
The installation dimensions shown are
the minimum spaces allowable.
Additional spacing should be
considered for ease of installation
and servicing. If closet door is
installed, the minimum air openings in
top and bottom of door are required.
L
ouvered doors with air openings in
top and bottom are acceptable.
Companion appliance spacing
should be considered.
Closet door
Front view
C
loset door
17"
(430 mm)
14"
(350 mm)
max.
4"
(100 mm)
min.
1" (25 mm)
min.
3"
(76 mm)
3"
(
76 mm)
2
4 sq. in.
(1.55 sq. m)
24 sq. in.
(1.55 sq. m)
48 sq. in.
(3.10 sq. m)
48 sq. in.
(3.10 sq. m)
If codes permit and a separate ground wire
is used, it is recommended that a qualified
electrician determine that the ground path
is adequate.
Do Not ground to a gas pipe.
Check with a qualified electrician if you are
not sure the washer is properly grounded.
Do Not have a fuse in the neutral or ground
circuit.
A 120-volt, 60-Hz, AC-only, 15- or
20-ampere fused electrical supply is
required. (Time-delay fuse or circuit breaker
is recommended.) It is recommended that
a separate circuit serving only this
appliance be provided.
8315954 Rev B ENv06:YC10665/8315954A 5/3/10 11:04 AM Page 4
Loading ...
Loading ...
Loading ...