Loading ...
Loading ...
Loading ...
14 | P a g e
OPERATION
INSTRUCTIONS
BEFORE USING YOUR APPLIANCE
Remove the exterior and interior packing
Before connecting the appliance to the power source, let it stand upright for approximat
ely
4 hours. This will reduce the possibility of a malfunction in the cooling system from
han
dling during transportation
SWITCHING ON/OFF THE AIR CONDITIONER
The appliance can be switched ON or OFF by pressing the Power button on the cont
rol
panel
or the Power button on the remote control
COOLING MODE
In this mode, the air conditioner cools and dehumidifies the room. To activate this functi
on
mode,
press the MODE button until the COOL indicator light comes on. When the coolin
g
mode
is set, the compressor will start in approximately 3 minutes. In cooling mode, hot
air is
ex
hausted from the outdoor exhaust port and the exhaust hose must be connected to
exhaust out the ho
t air
The temperature setting range of this air conditioner is from 62°F / 17°C to 88°F / 30°C. To
set the temperature, press the
or buttons. This air conditioner has a 5°F temperature
cushion w
hich if the set temperature is within 5°F of the ambient temperature, the unit ru
ns
on f
an only mode. This saves energy and prolongs the life of the compressor of the ai
r
condit
ione
r
To set the fan speed, press the FAN button. In cooling mode, the difference in noise leve
l
bet
ween the 3 fan speeds is not very noticeable when the compressor is on. Try setting t
he
unit
to Fan only mode, you should be able to hear the difference between high and low f
an
speed se
ttings
DRY (DEHUMIDIFYING) ONLY MODE
In this mode, the air conditioner only dehumidifies the room, the compressor will activate
intermittently depending on the ambient temperature and the fan speed is set to LOW. To
activate this function mode, press the MODE button until the DRY indicator light comes
on.
Please n
ote that when switching function mode, there will be an approximately 3 minut
e
t
ransition time. In dehumidifying mode, do not connect the exhaust hose and let the wa
rm
ai
r return to the room
AUTOMATIC MODE
When you set the air conditioner in AUTO mode, it will automatically select cooling or f
an
only
operation depending on what temperature you have selected and the room temperat
ure
is close to the unit. The fan speed is automatically selected and cannot be changed
To operate the unit in Auto mode when the unit is on, press the Mode button until th
e
indic
ator for “Auto” is
lit
FAN ONLY MODE
In this mode, only the fan of the air conditioner runs and circulates the air in the room. To
activate this function mode, press the MODE button until the FAN indicator light comes on
.
In this function mode, the temperature cannot be set. Subsequently, set the desired fan
speed
by pressing the FAN button. Fan Only mode requires that the exhaust hose be
removed
Loading ...
Loading ...
Loading ...