Loading ...
Loading ...
Loading ...
8. HOW TO INSTALL
Install refrigerator in a convenient location away from extreme heat and cold. Allow
sufficient clearance between the refrigerator and side wall so that the door will open for
a fully usable interior. Refrigerator is not designed for recessed installation.
Select a place with hard and level floor.
Allow 2 inches (50mm) of Minimum space between the refrigerator’s side and the wall.
Leveling :
Level refrigerator so that it rests firmly on the floor without rocking. There are two
leveling feet, one at each front corner. Turn to the left to raise a corner, to the right
to lower it. Use shims under the rear corner, if necessary.
If you want the refrigerator door to close when not held open, adjust glides so
that the front of the refrigerator is raised. However, front corners must be leveled
with each other.
If you want the refrigerator door to remain motionless when open, adjust the
leveling glides so that all four corners are leveled with each other.
NOTE: 1) Make sure all packaging material is removed. If the shipping tape has
left a residue on the door, touch the residue lightly with the side of tape
or with isopropyl alcohol (most rubbing alcohol is this type).
2) Do not place the product on flooring covered with carpet, overly
flexible, unstable or easily damaged by moisture.
9. HOW TO OPERATE
TEMPERATURE CONTROL
Your refrigerator has two controls to set inside temperatures at desired levels:
‘Freezer temperature control’ and ‘Refrigerator temperature control’. A conveniently
placed ‘Refrigerator temperature control’ enables you to set positions of MIN.,
MID, MAX After the setting, the refrigerator will become colder.
‘Freezer temperature control’ controls the quantity FRZ. MIN, NORMAL
& MAX are the settings available to you. When set at FRZ. MAX, the Freezer
compartment is at its coldest setting.
50mm
50mm
50mm 50mm
50mm
9
Loading ...
Loading ...
Loading ...