User Manual - Page 12

For MSZGL35VGDKIT. Also, The document are for others Mitsubishi models: MSZ-GL25VGD, MSZ-GL35VGD, MSZ-GL42VGD, MSZ-GL50VGD, MSZ-GL60VGD, MSZ-GL71VGD, MSZ-GL80VGD

Loading ...
Loading ...
Loading ...
En-11
● OPERATING INSTRUCTIONS ●
1. Lift the front panel until a “click” is heard.
2. Hold the hinges and pull to remove as shown in the above illustration.
Wipe with a soft dry cloth or rinse it with water.
Do not soak it in water for more than two hours.
Dry it well in shade.
3. Install the front panel by following the removal procedure in reverse. Close
the front panel securely and press the positions indicated by the arrows.
Air outlet and Fan (before cleaning, make sure that the fan is stopped)
CLEANING
5
Install the horizontal vanes by
following the removal procedure
in reverse.
If the horizontal vanes are not installed
correctly, all LED lamps blink when power
is turned on.
Note:
Do not apply excessive force to the fan or fan guard.
Instructions:
Switch off the power supply or turn off the breaker before cleaning.
Be careful not to touch the metal parts with your hands.
Do not use benzine, thinner, polishing powder, or insecticide.
Use only diluted mild detergents.
Do not expose parts to direct sunlight, heat, or fi re to dry.
Do not use water hotter than 50°C.
Air cleaning fi lter
(Anti-Allergy Enzyme Filter)
Back side of air fi lter
Clean every 3 months:
Remove dirt by a vacuum cleaner.
Put it back to its original position, and install all tabs of the air fi lter.
When dirt cannot be removed by vacuum cleaning:
Soak the fi lter and its frame in lukewarm water before rinsing it.
(Diluted mild detergents can be used when dirt cannot be removed.)
After washing with water, dry it well in shade. Install all tabs of the air fi lter.
Every year:
Replace it with a new air cleaning lter
for best performance.
Parts Number
GL25/35/42/50/60: MAC-408FT-E
GL71/80: MAC-2350FT-E
Important
Clean the lters regularly for best performance and to
reduce power consumption.
Dirty fi lters cause condensation in the air conditioner
which will contribute to the growth of fungi such as
mold. It is therefore recommended to clean air lters
every 2 weeks.
Air fi lter
Clean every 2 weeks
Remove dirt by a vacuum cleaner, or rinse with water.
After washing with water, dry it well in shade.
Pull to remove from the
air fi lter
1
Turn the horizontal vane down-
ward. Then, remove the vane as
shown in and .
Vane
Unlock
Turn the horizontal vanes down-
ward. Then, remove the upper
vane as shown in and .
Repeat and for the lower vane.
<GL25/35/42/50/60>
Upper vane
Unlock
2
Swing out the two vertical vanes
one by one.
3
Clean the air outlet and fan.
Wipe with a soft dry cloth.
4
Put the vertical vanes back to their
original positions correctly one by
one, into their respective guide.
Push the vanes until they click into place.
Guide
Hinge
<GL71/80>
<GL71/80>
GL71/80 only
Front panel
<GL25/35/42/50/60>
Hole
JG79A991H01_en_final.indd 11 2015/06/08 17:52:47
Loading ...
Loading ...
Loading ...